Thiết Bị Kiểm Tra Độ Ph Nước bể bơi / Spa Tiện Dụng

Bracket:The water quality tester owns a bracket on its right side to hold the testing when it is not used. This design is convenient for users to protect the and store it.
Spring wire:The spring wire design can meet long distance need when it is stretched. When it is not used, the spring wire can be short and saving space.
Hanger design:There is a hole on the top of the water quality tester, which is easy for users to hang the water quality tester on the wall.
Chlorine &PH testing:The water quality tester can test the water chlorine rate and PH data. One machine can hold two kinds of testing.
Portable:The water quality tester is powered by a AA 1.5v battery(not included) without power cable, which is convenient for users to carry out.

Usage:
Chlorine test - adjustment point:
Before using, please adjust the tester for the pool water or hot spring water to be tested in the following order:
1. Test swimming pool water or hot spring water with traditional liquid testing tools;
2. Record the chlorine reading for standby (1.5 PPM);
3. No adjustment is required for the PH.
Look for the adjustment point of the tester:
A. Place an AA 1.5 V battery in the battery compartment of the handle (positive side up).
B. Hold the tester in one hand and the test stick in the other.
C. Insert the cleaned metal rod into the water to the black position.
D. Gently stir the water with a metal rod.
E. When the metal bar is kept in the water, adjust the knob on the front of the watch to the direction of CL until it can no longer move. Then slowly turn back to the right until the pointer points to the tradition
The position of the result of the liquid test tool (eg 1.5).
F. Remove the test rod from the water, taking care not to move the knob. The pointer will slide to the right and a letter will stop between A and E. This letter is the adjustment point.
Note: The table must be adjusted to the "Adjustment Point" before each test of chlorine.
Specification:
Type: water quality tester
Colour:White
Material:Plastic + electrical components
Size:18 x 11.6 x 3cm

Package Contents:
1 * water quality tester

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1