Thiết Bị Cảm Biến Phát Hiện Kim Loại Từ Tính Njk-5001c Npn Dc M8
₫ 174.900
Sản phẩm Thiết Bị Cảm Biến Phát Hiện Kim Loại Từ Tính Njk-5001c Npn Dc M8 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome:)
Please read it carefully!
"All things ready stock"
This sensor is very useful for applications in project robotics., Cnc axis, 3d printer, Security sensor, And so on.
The size of this sensor is the m8 series, with a wide range of work stress (Dc 6 sd 36v) And the output is npn (Like the transistor output, low output when detecting magnets in max 8mm)
Specs:
Operating voltage: Dc 6-36v
Current output: 50ma
3 wire
Polarity:
M8x10 x 30mm dimention
Detection distance: Max 8mm
Ouput status: Normally open
Magnetic object detection:
Cable length around 1m
Pinout cable:
Blue cable = gnd
6v s / d 36vdc brown = supply cable
Black cable = output equivalent voltage supply (high when not detecting object and low when detecting magnet)
Note:
- for connection to arduino can 't be direct., Compulsory use of optocouplers or minimal voltage-sharing resistors, Check the video.
- magnetic plate installlation available. Don 't reverse., Tested it to the sensor to find out which side will activate the sensor.
Completeness:
1pcs magnetic pieces.
For the size and color it can be written down.
Buy = agree (no comp
Please read it carefully!
"All things ready stock"
This sensor is very useful for applications in project robotics., Cnc axis, 3d printer, Security sensor, And so on.
The size of this sensor is the m8 series, with a wide range of work stress (Dc 6 sd 36v) And the output is npn (Like the transistor output, low output when detecting magnets in max 8mm)
Specs:
Operating voltage: Dc 6-36v
Current output: 50ma
3 wire
Polarity:
M8x10 x 30mm dimention
Detection distance: Max 8mm
Ouput status: Normally open
Magnetic object detection:
Cable length around 1m
Pinout cable:
Blue cable = gnd
6v s / d 36vdc brown = supply cable
Black cable = output equivalent voltage supply (high when not detecting object and low when detecting magnet)
Note:
- for connection to arduino can 't be direct., Compulsory use of optocouplers or minimal voltage-sharing resistors, Check the video.
- magnetic plate installlation available. Don 't reverse., Tested it to the sensor to find out which side will activate the sensor.
Completeness:
1pcs magnetic pieces.
For the size and color it can be written down.
Buy = agree (no comp
Sản Phẩm Liên Quan
HOT
HOT