Súng Bắn Keo Công Nghiệp 120w Có Thể Điều Chỉnh Nhiệt Độ


₫ 205.300

Sản phẩm Súng Bắn Keo Công Nghiệp 120w Có Thể Điều Chỉnh Nhiệt Độ đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam

【Attack rate】:: 120w

【Specification for use of stick】: Straight through 11mm

【Power supply】:: support normal usage between 100v and 240v

【Purpose】:: apply to plastics, metals, wood, paper, toys, electronics, furniture, leather, and more for experience and development.. Etc.

【Characteristics】 High tech ceramic ptc is a hot fire element, heating speed, electrical insulation strength 3750v/min, voltage resistance 330/3 minutes built @ - @ in safety fuse, safer

【Method of use】:: insert tape directly through 10.8 @ - @ 11.5 mm from the tail of the glue gun into the barrel and plug in the power supply preheating for 5 @ - @ 8 minutes.

【Unique performance】::

A. Copper alloy is used in gun nozzles, which is more resistant to high temperature than in ordinary aluminum nozzles. the handle design conforms to the principle of manpower dynamics, feels well, and fatigues for long periods of time

B. The rear end of the gun is equipped with insulation equipment, plastic will be made of new environmental materials, with longer service life, fast heating automatic thermostatic price affordable function:
- Safe with thick wire
- With thermostatic and electrical indicator lights
- Suitable for diy - also for long @ - @ term use
- After the glue gun is used, unplug the power supply

- When the gun is completely cooled, put the gun in the toolbox. I. stick must not be pulled out

Note on glue gun leakage:
- Because the glue is driven by the buckler, increasing the internal pressure to squeeze the glue out, so just after the glue, the internal pressure is not released, because of inertia, even if you don't use the glue gun, the glue will leak out until the internal pressure is released
- As for how much more will be leaked after the glue is finished, the fuse with the gear, the power and the tape, and the strength and time of the plate @ - @ press. Therefore, according to the amount of glue that inertia may continue to flow out of the plate, release the board ahead of time, and select the appropriate clamping machine according to the required amount of glue to achieve the purpose of saving glue
- When you don't glue for a long time, because of heat, the glue melts a little back, the inside of the gun increases slightly, and the glue may flow a little bit.
Method of saving glue:
A: when the glue is not much at a time, the buckler is lighter and the glue is heavier.
B: high @ - @ grade glue gun, energy @ - @ efficient and glue @ - @ effic

Sản Phẩm Liên Quan

HOT

Bikini hàng Âu

₫ 400.000
HOT
HOT

Bikini Thái

₫ 300.000
HOT

Bikini OKISS- QCXK

₫ 400.000
HOT

Bikini xuất Âu

₫ 300.000