Súng Bắn Keo Bằng Nhựa Nylon 20w

Specifications:
This product uses high-tech ceramic PTC thermistor as heating element, and the heating speed is fast.
PTC heat sensitive when the temperature is increased to the design temperature of the glue tool, the resistor is not automatically rising, and the heating body can be prevented from being heated.
The electrical insulation strength of this product does not break down when it is energized at 3750V/min, and it can be used normally in an AC or DC power supply between 100V and 240V.
It is not limited by voltage fluctuations and has a built-in safety fuse, which making it safer to use.
The nylon plastic shell is high temperature resistant, which is suitable for frequent use, and the shell does not get hot.
It is suitable for bonding toy models, artificial flowers, Christmas trees, decorations, metal products, wood products, cardboard, electronic circuit boards, etc.

Using Instructions:
This series of products can be applied to glue sticks with a diameter of 7-7.5mm.
Insert the glue sticks from the end of the hot melt glue tool, and put it into the tube, then plug in the power supply and preheat for 5-8 minutes. Pull the trigger to extrude the glue and control the amount of glue.
During use, if you cant use up one glue stick at a time, you dont need to take it out. You can plug in the power supply to warm up for 5-8 minutes then using it directly.

Type: Hot Melt Glue Tool
Product Material: PC
Power: 20W
Plug Type: US Plug, EU Plug
Features: Compact, DIY Repair Tool, Easy to Use
Hot Melt Glue Tool Length: 120mm/4.72" (Approx.)
Product Size: 13.5cm x 11cm x 2cm/5.31" x 4.33" x 0.79" (Approx.)

Notes:
Due to the light and screen setting difference, the items color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.

Package Includes:
1 x Hot Melt Glue Tool (The Glue Sticks Not Inclu