Set 4 Mũi Khoan Lấy Ốc Vít Hỏng
35.000
₫ 24.500
Sản phẩm Set 4 Mũi Khoan Lấy Ốc Vít Hỏng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 35.000 xuống còn ₫ 24.500, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,2 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
--ღWelcome to the outdoor sports shop, I hope you can harvest happiness here.ღ--
Decription:
Features:
Removes any screw or bolt! (Phillips, flat, hex, painted & more)
Durable hardened steel construction
Quick & easy to use
Works w / any drill
Removes any stripped screw in 10 seconds or less
Even works on jagged, uneven, or rough breaks
Self centering tip, no walking
Compatible w / quick connect chuck systems
size: 1 #, 2 #, 3 #, 4 #
Usage:
remove broken screw in the wood, a head drill wood screw hole firstly, then use another head take screws.
If you've ever stripped a screw or broken off the head of a bolt, you know how frustrating that can be. Well, not anymore.
Introducing the damaged screw and bolt remover. With Screw Remover, you can easily remove any stripped screw in ten seconds or less.
You'll never again be slowed down or frustrated by a stripped screw or broken bolt. If you can use a drill, you can use the Screw Remover.
In fact, this patented process works so well it can even remove .
Stubborn deck screws out of redwood Even if you break off the entire head of a screw or bolt, you can still extract it right out No problem Made with Durable Hardened Steel and is reusable Great for!
Contractors, Carpenters, Handymen, Do-it-Yourselfers, Great for Anyone!
Works with ANY Screw or Bolt of ANY size! It is so simple, Anyone can use it!
How It's Used
Operating Instructions
directly into drill or quick-change chuck-Burnishing end is showing
Set drill for reverse (counterclockwise).
Place Burnishing end of tool into damaged screw, slowly clean inside screw head until smooth Note: Burnishing tool end in not to be used to drill a hole.
Removing
Remove Burnishing end from chuck, flip tool, replace into drill chuck-Remover end now showing.
Maintain reverse setting (counterclockwise).
Place Remover end of tool into now smooth screw head.
Apply firm downward pressure, drill at slow speed. Apply lowest level of power to the hand drill.
Remover end will thread into screw head and remove
Included:
4 x Damaged Screw Extr
Decription:
Features:
Removes any screw or bolt! (Phillips, flat, hex, painted & more)
Durable hardened steel construction
Quick & easy to use
Works w / any drill
Removes any stripped screw in 10 seconds or less
Even works on jagged, uneven, or rough breaks
Self centering tip, no walking
Compatible w / quick connect chuck systems
size: 1 #, 2 #, 3 #, 4 #
Usage:
remove broken screw in the wood, a head drill wood screw hole firstly, then use another head take screws.
If you've ever stripped a screw or broken off the head of a bolt, you know how frustrating that can be. Well, not anymore.
Introducing the damaged screw and bolt remover. With Screw Remover, you can easily remove any stripped screw in ten seconds or less.
You'll never again be slowed down or frustrated by a stripped screw or broken bolt. If you can use a drill, you can use the Screw Remover.
In fact, this patented process works so well it can even remove .
Stubborn deck screws out of redwood Even if you break off the entire head of a screw or bolt, you can still extract it right out No problem Made with Durable Hardened Steel and is reusable Great for!
Contractors, Carpenters, Handymen, Do-it-Yourselfers, Great for Anyone!
Works with ANY Screw or Bolt of ANY size! It is so simple, Anyone can use it!
How It's Used
Operating Instructions
directly into drill or quick-change chuck-Burnishing end is showing
Set drill for reverse (counterclockwise).
Place Burnishing end of tool into damaged screw, slowly clean inside screw head until smooth Note: Burnishing tool end in not to be used to drill a hole.
Removing
Remove Burnishing end from chuck, flip tool, replace into drill chuck-Remover end now showing.
Maintain reverse setting (counterclockwise).
Place Remover end of tool into now smooth screw head.
Apply firm downward pressure, drill at slow speed. Apply lowest level of power to the hand drill.
Remover end will thread into screw head and remove
Included:
4 x Damaged Screw Extr
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000