Quạt Tản Nhiệt Làm Mát Laptop Ukk1 Champion
₫ 360.800
Sản phẩm Quạt Tản Nhiệt Làm Mát Laptop Ukk1 Champion đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Bismillah
Laptop notebook cooler vacuum fan
Function:
1.Smoking heat from the side of the notebook (not from the bottom).
2. It has a speed setting (try the highest speed, to reduce excess heat on your notebook).
3. It has a rgb led light.
4. It has 4 different sizes of rubber for all types of notebooks.
5. Can be used any kind of notebook that has a heat sink hole from the side.( Please check your notebook from the side or from the bottom, This product can only be used for notebooks with heat exhausts from the side.).
6. Jump out and on.
7. Power input uses usb to mini usb cable.
8. Double foam 3m. It 'll be fitted directly to the vacuum holder coolingpad.
Product description:
1. 8.5x12 x 4.5cm
2. Inner packing 9.5x19 x 5.2cm
3. Fan speed 0-3000rpm.
4. Silent (silent at the time of use).
5. Dc 5v voltage
6. High speed motor dynamo
7. Abs plastic material.
8. Non-slip sponge.
The product that was acquired in packing
1. Vacuum fan cooling pad.
2. 4 different sizes of suction.
3. Usb to mini usb cable.
4. Double foam 3m (2pc).
5. 1pc vacuum holder cooling pad.
6. Inner packing.
7. 2pcs tentacle.
How to use:
1. Put the vacuum holder cooling pad on the body vacuum fan.
2. Put the rubber into the body vacuum (according to the size of the heat exhaust hole, find the appropriate and can be covered).
3. Put a 3m double tape on the vacuum fan holder. (It may not be necessary to attach it to your notebook.
4. Plug usb cable to body vacuum fan
5. Slip the vacuum fan holder sideways to the notebook. (Make sure it 's the size of the heat sink hole.)
6. Push the rubber that 's attached to the heat sink hole.
7. Plug the usb cable into the notebook.
- if there 's any damage that' s not our fault... Then it 's beyond the shop' s responsibility.
- if you 're going to make a return / exchange of goods, then the cost of delivering it is all on the buyer' s account
- product warranty has conditions and provisions in effect
Warranty does not apply when
Products have been damaged, repaired or modified by other parties (not officially / service center)
The warranty seal is broken.
Product damage is caused by user faults or other accidents
Products have suffered from physical defects (dent, dirty, blisters, etc.)
Warranty applies if the claimed product is still under war
Laptop notebook cooler vacuum fan
Function:
1.Smoking heat from the side of the notebook (not from the bottom).
2. It has a speed setting (try the highest speed, to reduce excess heat on your notebook).
3. It has a rgb led light.
4. It has 4 different sizes of rubber for all types of notebooks.
5. Can be used any kind of notebook that has a heat sink hole from the side.( Please check your notebook from the side or from the bottom, This product can only be used for notebooks with heat exhausts from the side.).
6. Jump out and on.
7. Power input uses usb to mini usb cable.
8. Double foam 3m. It 'll be fitted directly to the vacuum holder coolingpad.
Product description:
1. 8.5x12 x 4.5cm
2. Inner packing 9.5x19 x 5.2cm
3. Fan speed 0-3000rpm.
4. Silent (silent at the time of use).
5. Dc 5v voltage
6. High speed motor dynamo
7. Abs plastic material.
8. Non-slip sponge.
The product that was acquired in packing
1. Vacuum fan cooling pad.
2. 4 different sizes of suction.
3. Usb to mini usb cable.
4. Double foam 3m (2pc).
5. 1pc vacuum holder cooling pad.
6. Inner packing.
7. 2pcs tentacle.
How to use:
1. Put the vacuum holder cooling pad on the body vacuum fan.
2. Put the rubber into the body vacuum (according to the size of the heat exhaust hole, find the appropriate and can be covered).
3. Put a 3m double tape on the vacuum fan holder. (It may not be necessary to attach it to your notebook.
4. Plug usb cable to body vacuum fan
5. Slip the vacuum fan holder sideways to the notebook. (Make sure it 's the size of the heat sink hole.)
6. Push the rubber that 's attached to the heat sink hole.
7. Plug the usb cable into the notebook.
- if there 's any damage that' s not our fault... Then it 's beyond the shop' s responsibility.
- if you 're going to make a return / exchange of goods, then the cost of delivering it is all on the buyer' s account
- product warranty has conditions and provisions in effect
Warranty does not apply when
Products have been damaged, repaired or modified by other parties (not officially / service center)
The warranty seal is broken.
Product damage is caused by user faults or other accidents
Products have suffered from physical defects (dent, dirty, blisters, etc.)
Warranty applies if the claimed product is still under war