Bảng Mạch Mở Rộng Pcm5122 Cho Raspberry Pi Hifi Dac Hat Hifi Dac Cho Raspberry Pi 4 3 B + Pi Zero W
₫ 998.000
Sản phẩm Bảng Mạch Mở Rộng Pcm5122 Cho Raspberry Pi Hifi Dac Hat Hifi Dac Cho Raspberry Pi 4 3 B + Pi Zero W đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
The HiFi DAC Hat compatible with Raspberry Pi 4, Zero, Zero W, 3B, 3B+ with the 40-pin connector. Connects directly to the Raspberry Pi board, no additional cables required, no soldering. Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits.
support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) e.
Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film .
On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Adopt 384KHZ/32bit DAC PCM5122.
Demo Board Type:for Raspberry pi 2 b
el Number:for Raspberry Pi HiFi DAC HAT
Compatible: Raspberry Pi
Audio output interface: 2x R C A(LEFT &Right) & 3.5mm head phone Jack.
The headphones can be driven directly using a differential headphone driver (138mw).
The power indicator and the working status indicator are convenient for understanding the working status of the system.
Digital and analog power supplies are separately powered.
The size RPI HAT is fully compatible.
DAC SNR 112 dB.
DAC THD+N @ -1 dBFS -78dB. The DAC output amplitude is 2.1Vrms.
The DAC dynamic range is 112 dB.
Sample rate support range: 8khz ~ 384khz.
Reserve the ID EEPROM location.
The clock frequency is automatically switched according to the audio file sampling rate.
The clock unit uses two crystal oscillators with low jitter, high accuracy and low phase noise.
The DAC post-stage output iscoupled using a film .
Reserve infrared remote connector position (using GPIO26, users can solder by themsees).
colour:green
Material:plastic
Package Contents:
1 x expansion board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
support all Raspberry Pi music playback system, like OSMC, Max2Play, RuneAudio, Volumio, Moode, PiCorePlayer, PiMusicBox, OpenELEC, Debian, Ubuntu etc. Support playing music from a hard disk or over the network. Support DSD over PCM(DOP) e.
Class-leading stereo audio DAC PCM5122, sample rates up to 384-KHz/32-Bit. Paired with stereo high fidelity headphone amplifier TPA6133. Provides 2.1Vrms ground-centered outputs coupled with Film .
On-board a pair of gold plated RCA (LEFT &Right) jacks and a 3.5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals.
Adopt 384KHZ/32bit DAC PCM5122.
Demo Board Type:for Raspberry pi 2 b
el Number:for Raspberry Pi HiFi DAC HAT
Compatible: Raspberry Pi
Audio output interface: 2x R C A(LEFT &Right) & 3.5mm head phone Jack.
The headphones can be driven directly using a differential headphone driver (138mw).
The power indicator and the working status indicator are convenient for understanding the working status of the system.
Digital and analog power supplies are separately powered.
The size RPI HAT is fully compatible.
DAC SNR 112 dB.
DAC THD+N @ -1 dBFS -78dB. The DAC output amplitude is 2.1Vrms.
The DAC dynamic range is 112 dB.
Sample rate support range: 8khz ~ 384khz.
Reserve the ID EEPROM location.
The clock frequency is automatically switched according to the audio file sampling rate.
The clock unit uses two crystal oscillators with low jitter, high accuracy and low phase noise.
The DAC post-stage output iscoupled using a film .
Reserve infrared remote connector position (using GPIO26, users can solder by themsees).
colour:green
Material:plastic
Package Contents:
1 x expansion board
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1