Bộ Khung Nhựa Màu Vàng Đen Cho Đồng Hồ Casio Ga-400Gb-1A9 Gba-400

Brand: Casio/
Material: Resin
Accessory type: watch case
Gloss type: matte

Warm reminder: The model of the watch is generally displayed on the back of the case and consists of "letters-numbers"
For example, "DW-5600E", "AQ-160W", "GA-110B",

Product list: 1 rubber case, 1 Phillips screwdriver. (No screws, please keep the original screws properly!)
Brand: /CASIO
Original model: GA-400GB-1A9

General model: please consult customer service.
Strap link:
Case color: black, gold letters
Case material: resin
Case fixing: 4 screws on the side
Difficulty of case removal: difficult, need to consult or go to the repair shop to replace
First remove the watch strap, then unscrew 4 screws from the side of the watch case, then unscrew the 4 screws of the back cover, remove the back cover and the white gasket, carefully take out the knob lever and 3 washers (note the order and position) ,You can close the back cover without screwing back the screws, pinch the back cover and the glass, slowly buckle the shell from the gap between the shell and the inner shell on both sides of the back, go over the 2 buttons, remove the shell, and install the new plastic shell. The square button, pay more attention to the button, don't break it! Installation First, turn the upper and lower positions of the buttons to the right, don't reverse them, first install one side (the one with more buttons or the larger one), and then install the other side. Remove the back cover, retract the 3 washers in turn, carefully reinstall the knob rod, align the small holes of the movement, press on the white gasket, and close the back cover. You can press the back cover and pull down the knob rod first to try to install it in place No, reinstall it if it falls. Finally, take a good look at the waterproof ring and cover the back cover, and tighten the 8 screws.


Our watchbands are without screws and metal clasps. If you purchase the plastic case or screws separately, please leave a message for the specific model of the watch, so as not to cause the purchased accessories to become unusable.
Important note: depending on the batch, the watchband and case may not be exactly the same as the one worn by you. It is only guaranteed that the latest style of the genuine counter corresponding to the watch model is the same. If the resin strap is worn for a long time, it will become longer, wider and thicker, and the color will become darker and brighter. Compared with the old strap, it is not that the new strap is shorter and thinner.
This shop only sells genuine watch accessories. The installation of watch strap and rubber case requires skill. It is not guaranteed that everyone will install it by themselves. If you can't install it, please go to the repair shop. Thank you for your coopera