Ống Tản Nhiệt Cpu 6 Ống Bằng Đồng

！High quality, please contact me in time if you have any questions, thank you！
The heat sink is an indispensable part of the platform. It can help the CPU achieve a cool cooling effect and make the CPU run more stable. Often players will use a radiator with a heat pipe for installation. Players with different needs choose different radiators, and the number of heat pipes for the radiators will vary. There are radiators with single heat pipes, double heat pipes and eight heat pipes. The heat dissipation effects of these radiators are not the same.
Players need to choose the product that suits them according to their needs. Many players will say that the heat pipe of the radiator is used to conduct heat, and the heat of the CPU is blown through the fins to dissipate heat. In order to have a better heat dissipation effect, the number of heat pipes of the radiator needs to be a certain number, otherwise it is difficult to meet the needs of players. So how exactly does a heat pipe dissipate heat? Today I will take you to see.
The working principle of the heat pipe radiator is that the CPU generates heat, and the heat is transmitted to the heat-conducting copper pipe through the heat transfer base. When the heated end starts to heat, the liquid around the pipe wall will instantly vaporize and generate steam. These gaseous substances are along the capillary channel. It rises to the fins, and then dissipates heat by the fan.
The condensate becomes liquid again and descends along the pipe to the bottom to absorb heat again. In this cycle, there are two main reasons for the vacuum in the pipe. One is the liquid under vacuum.
The heat pipe is filled with a special liquid heat-conducting medium. When a temperature difference occurs between the two ends of the heat pipe, the liquid at the evaporation end will quickly vaporize and bring heat to the condensing end. This thermal conduction method can prevent heat from accumulating on the heat-generating parts, but can be evenly distributed to the aluminum fins of the heat sink, which greatly improves the thermal conductivity of the heat sink.
Color: Double Ring Colored light
Material: Copper + Aluminum + ABS
Fan Size: 92*92*25mm
Rated Voltage: 12V DC
Air Flow: 48 CFM
LED Type: RGB Mixed Color
Bearing Type:Hydrablic
Cooling Method: Heat pipe/Air Cooling
Speed: 800-2000RPM ±10%
Special Effects: Mute / RGB Lights
Noise Value: 20dBA±10%
Life: 50,000 Hours
Connector: fans with 3 pins
For LGA1150/1155/1156/1151/775/AM4;AMD AM3/FM2
Analyze the principle of heat pipe radiator
1.Simple and easy to install(For LGA1150/1155/1156/1151/775/AM4;AMD AM3/FM2)
2. RGB Lighting effect,showing cool personality.Multicolored aperture design, soft light effect, cool personality
3.Center3-pin 9CM fan, using hydraulic bearing technology, large air volume, low noise, long service life, reducing common noise between the fan and the chassis, quiet work.
4. Six pure copper heat pipes use fin cooling technology to increase the fin group