Onebuycart DC6-12.8V 360W 32A High-Power Brushless PWM Controller Motor Speed Control New

Your Best Choice

Description:
This controller is designed for high-power brushless motor. It is small but has many functions, including steering gear test function.
Feature:
With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors. It has several functions:
1.Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is necessary for high-speed high-power motor to protect user's safety.
2. Temperature Protection: The speed control has aluminum heat sink, which allows it work at 30 A continuously. When temperature reaches 110℃, temperature detect system will send a protection signal and system will auto decrease 60% power output to protect speed control and motor. It will back to normal power after temperature is decreased. To protect the actuator module, please dissipate heat during long-time using.
3. The signal loss prevention: Auto shut down when there is no signal detected from PWM signal generator(potentiometer ).
4. Power Identification System: The speed control has power identification system, which is designed for high-speed high-power motors such as in model plane. It is not suitable for low-power brushless motors.
5, Programming Functions: With single-chip control system, some functions could be altered:
a, Startup: Flexible slow startup/direct startup
b, Braking: Reverse load quick braking/free braking
c, Adjustable Timing: Small/medium/large
d, Low Voltage Protection: Low/medium/high
e, Battery Types: Lithium /nickel chrome/NIMH/plumbic acid
6. Back to Factory Settings: Wrong operation can be cleared
6. Other Function(please ignore if only used for motor drive ) : The external PWM signal generator can send  signal to control speed or to turn steering gear, therefore it can test steering gears less than 55 g.

Specifications:
Rated Voltage: DC 6-12.8 V (12 V suggested, no higher than 12.8 V)
Rated Current: 30A(no higher than 40 A)
Rated Power: 5 V 0.5 A
Temperature Protection: 110℃                  
speed Control Range: 8%-98% 
Suitable Number of Poles: 2-18
Startup Methods: Flexible slow startup/direct startup
Braking Mode: Reverse load braking/without braking
speed Control Signal: 8 KHz / 16 KHz  fixed frequency PWM
Steering Gear Test Function: Below 55 g
Packaging list:
1 x speed Controller

Note:
New-style and old-style are shipped random