Mô-đun Màn Hình Lcd Nokia 5110 Mlg A1
₫ 108.400
Sản phẩm Mô-đun Màn Hình Lcd Nokia 5110 Mlg A1 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Speciation:
4-board led white backlight light uniformity
Pcb size: 45 (mm) x 45 (mm)
The corners were positioning holes, along with two arrows of the upper and lower connection port, ranked as followers:
Vcc - power input (3.3v)
Gnd - ground
Sce-chip select
Rst - reset
D / c - data / instruction selection
Dn - data line series
Clk - clock line series
Led - backlit console
Power supply voltage: 2.7v-3.3v.5v is ok, but part of the screen becomes black when tested.
Interface level data: 2.7-5v.
Backlight power supply voltage: Highest 3.3v.
Diameter installlation: 2mm.
84x84 dot matrix lcd ,can show 4 lines of characters.
Use series interface communicate with the master processor,The number of interface signal line reduced greatly, Only 8 signal lines including power and gndsupport different types of mcu,# such as the spi,Mcs51 mode 0 of avr.transfer rate up to 4mbps series,Can full speed write display data without waiting time.
Can use the conductive glue to connect the module with the printed board ,without connecting cable.the metal hooks on the module can fix the module on the printed board, which is very easy to installl and replace.
Tutorial: http://wwwavdwebnl/arduino/hardware-interfac
4-board led white backlight light uniformity
Pcb size: 45 (mm) x 45 (mm)
The corners were positioning holes, along with two arrows of the upper and lower connection port, ranked as followers:
Vcc - power input (3.3v)
Gnd - ground
Sce-chip select
Rst - reset
D / c - data / instruction selection
Dn - data line series
Clk - clock line series
Led - backlit console
Power supply voltage: 2.7v-3.3v.5v is ok, but part of the screen becomes black when tested.
Interface level data: 2.7-5v.
Backlight power supply voltage: Highest 3.3v.
Diameter installlation: 2mm.
84x84 dot matrix lcd ,can show 4 lines of characters.
Use series interface communicate with the master processor,The number of interface signal line reduced greatly, Only 8 signal lines including power and gndsupport different types of mcu,# such as the spi,Mcs51 mode 0 of avr.transfer rate up to 4mbps series,Can full speed write display data without waiting time.
Can use the conductive glue to connect the module with the printed board ,without connecting cable.the metal hooks on the module can fix the module on the printed board, which is very easy to installl and replace.
Tutorial: http://wwwavdwebnl/arduino/hardware-interfac
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000