Mô đun điều khiển động cơ bước 42/57 CNC TB6560 TB6600 3A
130.000
₫ 93.100
Sản phẩm Mô đun điều khiển động cơ bước 42/57 CNC TB6560 TB6600 3A đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 130.000 xuống còn ₫ 93.100, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
This product has been fully tested, and has been applied to the engraving machine, patches and other equipment, quality assurance, ease of use.
1) Working voltage DC 10V-35V. DC24V switching power supply is recommended.
2) the use of high-speed optical coupling 6N137, ensure high speed without losing step.
3) Toshiba TB6560AHQ new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit to ensure optimum performance.
4) The maximum rated output: ± 3A
5) for 42, 57 3A stepper within two-phase / four-phase / four-wire / six-wire stepper motor is not suitable for more than 3A stepper motor.
6) automatic semi-flow function.
7) Subdivision: full step, half step, step 1/8, 1/16-step, 1/32-step,up to 32 segments.
8) Volume: Width Length 75 * 50 * high 35 (MM)
Similar products in features:
1, the current level by adjustable to meet your various application requirements.
2, semi-automatic adjustable flow.
3, using high-speed optical coupling 6N137, ensure high speed without losing step.
4, plate printing setup instructions, can operate without ma
1) Working voltage DC 10V-35V. DC24V switching power supply is recommended.
2) the use of high-speed optical coupling 6N137, ensure high speed without losing step.
3) Toshiba TB6560AHQ new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit to ensure optimum performance.
4) The maximum rated output: ± 3A
5) for 42, 57 3A stepper within two-phase / four-phase / four-wire / six-wire stepper motor is not suitable for more than 3A stepper motor.
6) automatic semi-flow function.
7) Subdivision: full step, half step, step 1/8, 1/16-step, 1/32-step,up to 32 segments.
8) Volume: Width Length 75 * 50 * high 35 (MM)
Similar products in features:
1, the current level by adjustable to meet your various application requirements.
2, semi-automatic adjustable flow.
3, using high-speed optical coupling 6N137, ensure high speed without losing step.
4, plate printing setup instructions, can operate without ma