Mô Đun Điều Khiển Đèn Led Thông Minh Esp8266 Esp-01 Esp-01S Rgb Cho Ide Ws2812
₫ 20.300
Sản phẩm Mô Đun Điều Khiển Đèn Led Thông Minh Esp8266 Esp-01 Esp-01S Rgb Cho Ide Ws2812 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
ESP8266 ESP-01 ESP-01S RGB LED Controller Module for IDE WS2812 Light Ring Smart Electronic DIY
characteristic:
Master: ESP-01/ESP-01S (This module does not include ESP-01/ESP-01S)
Interface: 3Pin PH2.0 connector
Working voltage: DC 3.7V-5V (please note: the power supply positive is the VCC on the board and the VCC on the WS2812 3PIN interface is connected together, so if your light bar/light ring is 5V power supply control, please use DC 3.7V-5V power supply.)
Support 3.7V lithium battery power supply
Application example:
1. Power supply: 3.7V-5V DC power supply is connected to VCC GND (2.54mm pin)
2. Download the program to ESP-01S
3. Insert the ESP-01/ESP-01S into the 2*4 Pin female
This is a WS2812 or WS2812B RGB LED controller based on the ESP-01 /ESP-01S. With this board, your will easy to make your colorful display project
Feature:
1.Main chip: ESP-01/ESP-01S (This board Not include the ESP-01/ESP-01S)
2.Interface: 3Pin PH2.0 for WS2812
3.Working voltage: DC 3.7V-5V (Support 3.7V Lipo battery)
Usage:
1.Power supply: 3.7V Lipo battery connect to the VCC GND (2.54mm male header)
2.Upload the code to ESP-01S(ESP-01)
3.Plug the ESP-01S(ESP-01) to the m
characteristic:
Master: ESP-01/ESP-01S (This module does not include ESP-01/ESP-01S)
Interface: 3Pin PH2.0 connector
Working voltage: DC 3.7V-5V (please note: the power supply positive is the VCC on the board and the VCC on the WS2812 3PIN interface is connected together, so if your light bar/light ring is 5V power supply control, please use DC 3.7V-5V power supply.)
Support 3.7V lithium battery power supply
Application example:
1. Power supply: 3.7V-5V DC power supply is connected to VCC GND (2.54mm pin)
2. Download the program to ESP-01S
3. Insert the ESP-01/ESP-01S into the 2*4 Pin female
This is a WS2812 or WS2812B RGB LED controller based on the ESP-01 /ESP-01S. With this board, your will easy to make your colorful display project
Feature:
1.Main chip: ESP-01/ESP-01S (This board Not include the ESP-01/ESP-01S)
2.Interface: 3Pin PH2.0 for WS2812
3.Working voltage: DC 3.7V-5V (Support 3.7V Lipo battery)
Usage:
1.Power supply: 3.7V Lipo battery connect to the VCC GND (2.54mm male header)
2.Upload the code to ESP-01S(ESP-01)
3.Plug the ESP-01S(ESP-01) to the m