Miếng Dán Thay Đổi Màu Cho Đèn Pha Xe Ô Tô
67.100
₫ 33.700
Sản phẩm Miếng Dán Thay Đổi Màu Cho Đèn Pha Xe Ô Tô đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 67.100 xuống còn ₫ 33.700, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
[noble]N Chameleon color changing tint vinyl wrap sticker headlight film car light lamp Feature:
-Brand new and high quality
-Waterproof
-Smooth Surface
-Stretchable
-Self-Adhesive
-Easy Removal with No Residual
-Suitable for Any Headlights, Fog Lights, Side Marker lights or Even Top Part of the Windshield, etc.
Description?
Material: Polymer PVC
Size: approx. 30cm x 60cm /(11.81" x 23.62")
Color:As the picture shows
Installation:
Cleaning the surface with water prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
-Measure the size you need, then use the knife to cut.
-Choose the location to stick and clean with the wet towel.
-Spray water thin on the surface of light.
-Rip away the film and spray water on it.
-Blow dry with heat gun to remove bubbles.
-Use the tool again to strike off the bulb carefully as it will influence the eventually effect.
-Use a art knife to cut the rest film.
Package including:
1 X Headlight Sticker
Note:
Due to the hand measurement, there have size error about 1-5mm
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated
-Brand new and high quality
-Waterproof
-Smooth Surface
-Stretchable
-Self-Adhesive
-Easy Removal with No Residual
-Suitable for Any Headlights, Fog Lights, Side Marker lights or Even Top Part of the Windshield, etc.
Description?
Material: Polymer PVC
Size: approx. 30cm x 60cm /(11.81" x 23.62")
Color:As the picture shows
Installation:
Cleaning the surface with water prior to installing the vinyl will help with adhesion and clean any contaminants that may cause imperfections.
-Measure the size you need, then use the knife to cut.
-Choose the location to stick and clean with the wet towel.
-Spray water thin on the surface of light.
-Rip away the film and spray water on it.
-Blow dry with heat gun to remove bubbles.
-Use the tool again to strike off the bulb carefully as it will influence the eventually effect.
-Use a art knife to cut the rest film.
Package including:
1 X Headlight Sticker
Note:
Due to the hand measurement, there have size error about 1-5mm
Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated