Máy Quét Tường Đa Năng 5 Trong 1 Tiện Dụng Chất Lượng Cao

UPGRADED VERSION - 5 IN 1 DEEP DETECTION: This stud finder includes 5 different scanning es, which is provides users with more detection needs. It suitable for metal tubes, fire lines, studs, wooden frames, steel bars and brackets, as well as ceilings, deep embedded objects behind walls. It features 5 e: 1/2 inch(13 cm), 1 inch (25 mm) and 1.5 inch (38 mm), Metal scan (60 mm)and AC scan (51 mm).
HIGH EFFICIENCY:The wall scanner detector has a graphical LCD display, which indicates many clues in detection, such as detection e, signal intensity, automatic calibration, battery indicator, and has maximum readability. When the battery power is low, the low battery indicator icon shows you to replace the new 9V battery in time.
EASY & FAST TO USE:The stud wall scanner can quickly locate the metal s, tubes, steel bars, and the beams on the walls, floors, and ceilings, as well as the edges and centers of the electrified AC wires. Select the probe type ,then just press and hold the side button and scan horizontally across the object surface. Auto power off without any operation after 60 seconds .
ACCURATE CALIBRATION:The wall scanner will be automatically calibrated when it opens. Calibration is done by positioning the device on a wall without s, alternating wires or metal. When you have detected an object with the wall scanner, it will beep continually. The big sound warning together with the LCD screen helps detect the accurate location of the objects.
The stud finder is light weight and has ergonomically designed one-key-operate handle.
colour:Sier
Material:ABS+electronic components
size:164 x 75 x 35mm
Package Contents:
1 x Stud Finder
1 x 9V battery
1 x English manual
OPERATING TIPS:
Grasp the handle with your thumb on one side and your fingers on the other side. Make sure your fingertipsare resting on the handle and not Pressing the surface being scanned or the scanning head of the tool.
Hold the tool straight up and down, parallel to the studs, and do not rotate the tool.
Keep tool flat against the wall and do not rock, tilt, or press hard when slowly sliding across the surface being scanned.
In case of deeper studs(thicker walls), when the center of the stud is located, not full bars will show on the screen. If you still can't locate a stud, try stud 1 in. or stud 1 1/2 in. stud e.
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1