Màn hình LCD 12864 cho điều khiển đồ họa với cáp kết nối ca V1
₫ 215.000
Sản phẩm Màn hình LCD 12864 cho điều khiển đồ họa với cáp kết nối ca V1 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display.
You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card.
Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller.
Print your 3D designs without PC, just with a g-code design stored on the SD card.
Color: Red
Material: ABS
Using a large screen 12864LCD(3.2inch), it can support 8 GB;
With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
Product comes encoder parameter adjustment can be achieved, and the file selection print!
Plug and play on the RAMPS, but need to modify the firmware to support.
Package include:
1x 12864 LCD controller (SD card not included)
1x Connector
2x 30 cm cable
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card.
Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller.
Print your 3D designs without PC, just with a g-code design stored on the SD card.
Color: Red
Material: ABS
Using a large screen 12864LCD(3.2inch), it can support 8 GB;
With a SD card base on back, put slicing file into the SD card and select the file on the LCD, then can be printing
Product comes encoder parameter adjustment can be achieved, and the file selection print!
Plug and play on the RAMPS, but need to modify the firmware to support.
Package include:
1x 12864 LCD controller (SD card not included)
1x Connector
2x 30 cm cable
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1