Mạch nguồn Pin 5V chuyên dụng cho Raspberry Pi
₫ 490.000
Sản phẩm Mạch nguồn Pin 5V chuyên dụng cho Raspberry Pi đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Mạch nguồn Pin 5V chuyên dụng cho Raspberry Pi, cấp trực tiếp qua GPIO hoặc qua cổng USB.
Li-poolymer Battery HAT for Raspberry Pi, SW6106 Power Bank Solution, with Embedded Protection Circuits
Overview
The Li-polymer Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Raspberry Pi or other 5V devices, from a high capacity Li-polymer battery. It will charge the battery as well, supports bi-directional quick charge.
Compared with the Li-ion Battery HAT, this HAT utilizes Li-polymer battery with higher capacity, which means longer battery life, and allows higher loads. The size of the HAT is more fit for Raspberry Pi B/A+/B+/2B/3B/3B+/4B.
Features
Onboard SW6106 chip, supports bi-directional quick charge, supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
Lithium battery protection circuitry, provides reverse protection, over charge protection, and short circuit protection
Onboard indicators: quick charge, power capacity
PH 2.0 battery connector, for connecting the 3.7V 3000mA high capacity Li-polymer battery (MSDS certified)
Specifications
Output voltage: 5V
Charge voltage: 5V
Applicable battery: 3.7V Li-polymer battery (4.2V when full charged)
Dimension: 65.0mm × 56.5mm
Mounting hole size: 3.0mm
PACKAGE CONTENT
Weight: 0.076 kg
Note: the Raspberry Pi is NOT included.
Li-polymer Battery HAT x1
3.7V 3000mAh Li-polymer battery x1
RPi screws pack (2pcs) x1
#proe
#RaspberryPi
Li-poolymer Battery HAT for Raspberry Pi, SW6106 Power Bank Solution, with Embedded Protection Circuits
Overview
The Li-polymer Battery HAT integrates SW6106 power bank management chip, allows providing 5V regulated power supply to your Raspberry Pi or other 5V devices, from a high capacity Li-polymer battery. It will charge the battery as well, supports bi-directional quick charge.
Compared with the Li-ion Battery HAT, this HAT utilizes Li-polymer battery with higher capacity, which means longer battery life, and allows higher loads. The size of the HAT is more fit for Raspberry Pi B/A+/B+/2B/3B/3B+/4B.
Features
Onboard SW6106 chip, supports bi-directional quick charge, supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
Lithium battery protection circuitry, provides reverse protection, over charge protection, and short circuit protection
Onboard indicators: quick charge, power capacity
PH 2.0 battery connector, for connecting the 3.7V 3000mA high capacity Li-polymer battery (MSDS certified)
Specifications
Output voltage: 5V
Charge voltage: 5V
Applicable battery: 3.7V Li-polymer battery (4.2V when full charged)
Dimension: 65.0mm × 56.5mm
Mounting hole size: 3.0mm
PACKAGE CONTENT
Weight: 0.076 kg
Note: the Raspberry Pi is NOT included.
Li-polymer Battery HAT x1
3.7V 3000mAh Li-polymer battery x1
RPi screws pack (2pcs) x1
#proe
#RaspberryPi
Sản Phẩm Liên Quan
HOT
HOT