Lõi Dây Ls Esun Petg 1.75mm Cho Máy In 3d + / - 2.2lb
635.139
₫ 482.706
Sản phẩm Lõi Dây Ls Esun Petg 1.75mm Cho Máy In 3d + / - 2.2lb đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 635.139 xuống còn ₫ 482.706, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
eSUN PETG 1.75mm 3D Printer Filament Printing Consumables Dimensional Accuracy: +/- 0.05mm 1kg(2.2lb) Spool Material Refills Solid Green
Features:
1KG Net (approximately 2.2lbs) Filament with Clear Spool.
eSUN PETG 3D Printer Filament Vacuumed Sealed with Desiccant.
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230°C - 250°C
Spool Diameter: 8", Spool Width: 2.50", Spool Hub Hole Diameter: 2.05", Inner Circle Diameter: 3.5"
Specifications:
Color: Solid Black/ Solid White/ Solid Red/ Solid Yellow/ Solid Blue/ Solid Green(optional)
Filament Diameter: 1.75mm
Dimensional Accuracy: +/- 0.05mm
Extrusion Temperature Range: 230°C-250°C
Plate Temperature: 80~90 or Without Heated
Printing Speed: 30~60mm/s
Moving Speed: 30~60mm/s
Advantages of PETG:
PETG is an excellent material which combines the advantages of both PLA and ABS.
Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish.
Packing List:
1 * 3D Printer Fil
Features:
1KG Net (approximately 2.2lbs) Filament with Clear Spool.
eSUN PETG 3D Printer Filament Vacuumed Sealed with Desiccant.
1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm)
Recommended Extrusion/Nozzle Temperature 230°C - 250°C
Spool Diameter: 8", Spool Width: 2.50", Spool Hub Hole Diameter: 2.05", Inner Circle Diameter: 3.5"
Specifications:
Color: Solid Black/ Solid White/ Solid Red/ Solid Yellow/ Solid Blue/ Solid Green(optional)
Filament Diameter: 1.75mm
Dimensional Accuracy: +/- 0.05mm
Extrusion Temperature Range: 230°C-250°C
Plate Temperature: 80~90 or Without Heated
Printing Speed: 30~60mm/s
Moving Speed: 30~60mm/s
Advantages of PETG:
PETG is an excellent material which combines the advantages of both PLA and ABS.
Little shrinkage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish.
Packing List:
1 * 3D Printer Fil