Kính Cường Lực Tự Dính Cho Máy Ảnh Fujifilm X-A7 XA7
₫ 51.000
Sản phẩm Kính Cường Lực Tự Dính Cho Máy Ảnh Fujifilm X-A7 XA7 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description
-Material: Made of High-alumina glass, with High light-transmittance. The glass is explosion-proof, anti-glare, scratch proof, high temperature resistant. Hardness: 8H, Transparency: >96%, Adsorption: 130g/cm2, Impact force: 12kg/cm2, without bubbles on the edge, dust proof, sweat proof, anti-aging
-No sticky residue. Unlike other screen protector, when people use the self-adhesive screen protector to install on the camera screen, if users want to remove it, there will no sticky residue.
-Self-adhesive craftsmanship. It can self-adhesive the screen protector on the camera screen. Easily and conveniently for users.
-No bubbles. The self-adhesive screen protector can perfectly fit the camera screen, there will no bubbles under protector. Make the camera screen shows the image more clearly.
-Ultra thin design, thickness: 0.3mm+/-0.05mm. The protector is ultra thin. When installing,it is almost as same as the camera screen without protector but not good for the flip screen, it may be not covered on camera to sealed 100%.
-Nice touching experience and visual effect for capacitive screen. The excellent craftsmanship of anti-glare frame design greatly increases the clear viewing. And the surface of the screen protector is well polished and nanometer coating, so it can greatly avoid leaving fingerprint on the screen protector. It can not only provide the best protect for the camera screen, but also guarantee the perfect user experience.
Note: not support resistive screen, no touch function if stuck on. Please confirm or check with us before payment.
How to install
-Clean the screen with wet wipe
-Dry and clean the screen with dry wipe
-Use the dust-absorber to absorb the dust or dirt left
-Peel off the film attached on side marked with 1
-Align it to the camera screen and press to the center
-It will be attached automatically due to self-adhesive design
-DO NOT Forget to exhaust air around before complete attachment
Suitable for
Fujifilm X-A7 only
Include
1 X Glass Protector
1 X Wet Cleaning Wipe
1 X Dry Cleaning Wipe
1 X Dust-abs
-Material: Made of High-alumina glass, with High light-transmittance. The glass is explosion-proof, anti-glare, scratch proof, high temperature resistant. Hardness: 8H, Transparency: >96%, Adsorption: 130g/cm2, Impact force: 12kg/cm2, without bubbles on the edge, dust proof, sweat proof, anti-aging
-No sticky residue. Unlike other screen protector, when people use the self-adhesive screen protector to install on the camera screen, if users want to remove it, there will no sticky residue.
-Self-adhesive craftsmanship. It can self-adhesive the screen protector on the camera screen. Easily and conveniently for users.
-No bubbles. The self-adhesive screen protector can perfectly fit the camera screen, there will no bubbles under protector. Make the camera screen shows the image more clearly.
-Ultra thin design, thickness: 0.3mm+/-0.05mm. The protector is ultra thin. When installing,it is almost as same as the camera screen without protector but not good for the flip screen, it may be not covered on camera to sealed 100%.
-Nice touching experience and visual effect for capacitive screen. The excellent craftsmanship of anti-glare frame design greatly increases the clear viewing. And the surface of the screen protector is well polished and nanometer coating, so it can greatly avoid leaving fingerprint on the screen protector. It can not only provide the best protect for the camera screen, but also guarantee the perfect user experience.
Note: not support resistive screen, no touch function if stuck on. Please confirm or check with us before payment.
How to install
-Clean the screen with wet wipe
-Dry and clean the screen with dry wipe
-Use the dust-absorber to absorb the dust or dirt left
-Peel off the film attached on side marked with 1
-Align it to the camera screen and press to the center
-It will be attached automatically due to self-adhesive design
-DO NOT Forget to exhaust air around before complete attachment
Suitable for
Fujifilm X-A7 only
Include
1 X Glass Protector
1 X Wet Cleaning Wipe
1 X Dry Cleaning Wipe
1 X Dust-abs