Khuôn Silicone làm khay tròn dài phong cách Bắc Âu

Product size: approximately 18.5x9.5x1.6 cm
Finished size: approximately 18.0x9.0x1.5 cm
Product weight: about 100g


Steps for the production of aroma gypsum:
1: prepare 100g gypsum powder, 35g water (30-35 g water)
-pour water into gypsum and stir it quickly and evenly.
-stir the plaster into the mold.
-shake the mold up and down, drain bubbles, and scrape off the surface with a scraping board.
-can be demodeled in about 30-60 minutes.
-can be polished, oil drip, color, and decorated after demodeling.
Ps: gypsum powder recommended imported white porcelain powder, fine powder, zero formaldehyde.
Pigments are recommended to use iron oxide powder or imported acrylic pigments, which are high saturation and do not fade without fear of water or matte.
Essential oils are recommended to use aromatic therapy grade essential oils, high concentration, no alcohol added, dilution water.


Cement production curriculum
1: mix well with cement, water, quartz sand, pour over mold, cool day, dry, and dry in demoderation.
2: super strong cement+water or cement+water
3: pure cement+quartz sand+water or pure cement+fine sand+water
4: if you want to have a color planter, add iron oxide pigment and iron oxide with whatever color you like
5: gypsum can also be, mixing with gypsum+water to fill the mold in three hours dry, can be color-painted or painted at will.
6: the mixing ratio varies from person to person.1: 1 or 2.5: 1 or 3: 1
7: the cement is filled with mold, need to cool day and night, feel whether it's dry, thoroughly dry, and turn over the wall thickness of the surrounding, gently drag out.That's how you get out of the mold.
It is recommended that more than 42.5 cement be selected, sand fine sand or quartz sand, and the ratio of cement to sand is between 1: 1-1: 3.The ratio of cement to water is between 1: 0.4-1: 0.7. sand is non-absorbent, and cement mixed with sand calculates only the amount of cement used.If not gaza, the drying process shrinks too much and is prone to cracking.
52.5 cement 8-12 hours demodel, cement 20-24 hours demodel, cement 32.5 more than 24 hours demodel, double the demodel time in cloudy and humid environments.The thicker the mold, the longer it takes to die out


Method of making drip glue:
-soft crystal glue operating methods:
L prepare containers for use and clean and dry molds.
2: 1-gage the required components of a and b crystal glue and heat group a to 40°Add group b around c, pour into the container, stir evenly, and remove bubbles.
3. after defoaming, glue is evenly dropped on the mold, such as a small cup or syringe, such as the edge of the mold crystal glue does not flow (basically can walk), can be moved by a small needle to make the glue evenly coated on the surface.
4 gel curing: coated mold, gel time about room temperature 25°The curing time of c3 hours is about 36 hours room temperature.Or put the finished mold in 60°C in the thermostatic drying box, 3 hours is completely cured.。
-operation of hard thermosetting