Kéo chiết ghép cành cây đa năng
₫ 179.472
Sản phẩm Kéo chiết ghép cành cây đa năng đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Features:
Rootsto and scion it is easy to match the U-cut-cut or Ω-cut, rapid healing
Using easily and fastly. Grafting method than the traditional savings
The time and effort Blade can be replaced
Use the pruner to cut useless branches from the plant
Specifications:
For the knife
Materials: carbon steel, ABS and Aluminum
Color bla
Cut grafting stos from 5mm up to 1.4cm diameter
Trimming blades 3mm thi
Phillips screwd with red handle
Size 27cm * 10cm/10.5inch * 3.9inch
(1cm=0.39Inches)
A wrench
2 additional blades
How to use:
Step 1: Hold the grafting sto in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the sto plant.
Step 2: Slide the donor stem into the groove of the sto plant, matching the cut surfaces as closely as possible. If the sto and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with \"V & U & Ω\" blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.
Note:
Keep out of reach of children do not use on dry or old hard
Rootsto and scion it is easy to match the U-cut-cut or Ω-cut, rapid healing
Using easily and fastly. Grafting method than the traditional savings
The time and effort Blade can be replaced
Use the pruner to cut useless branches from the plant
Specifications:
For the knife
Materials: carbon steel, ABS and Aluminum
Color bla
Cut grafting stos from 5mm up to 1.4cm diameter
Trimming blades 3mm thi
Phillips screwd with red handle
Size 27cm * 10cm/10.5inch * 3.9inch
(1cm=0.39Inches)
A wrench
2 additional blades
How to use:
Step 1: Hold the grafting sto in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the sto plant.
Step 2: Slide the donor stem into the groove of the sto plant, matching the cut surfaces as closely as possible. If the sto and donor plant are not the same size, match on the side only.
Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with \"V & U & Ω\" blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.
Note:
Keep out of reach of children do not use on dry or old hard
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000