Hm-10 Transparent Serial Port Bluetooth 4.0 module Bluetooth serial port with logic level conversion
₫ 56.193
Sản phẩm Hm-10 Transparent Serial Port Bluetooth 4.0 module Bluetooth serial port with logic level conversion đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Advantages of this module:
1. Internal logic level conversion circuit. No need to externally convert 5V level to 3.3V level
2. Power input port with anti-circuit. Avoid module burn - out caused by accidental power plug - in.
Apple IOS5 /IOS6 support, please download the following information before you buy. Thank you very much!
Hm-10 module information package download :(ios 5/6 development source code, module AT instruction, etc., please download by yourself, thank you!)
Hm - 10 tutorial:
Several important points of IOS, I hope customers to use the module, first look at this document! Keep it in mind.
(Applicable to apple 4S, 5 and 5s after the machine)
For IOS:
1.IOS search for Bluetooth, not search and pair bluetooth in Settings - Bluetooth. (Only bluetooth headset can be connected in IOS Settings. Unable to find wireless data device)
2. Search LightBlue software through AppStore in IOS, and then open LightBlue software to find HM-10, and then match, test, send and receive it!
The android mobile phone
1. First, confirm whether the Bluetooth module of the Android phone hardware supports Bluetooth 4.0. (If the phone hardware module does not support it, the software can't do it correctly!)
2. System upgrade to version 4.3 or later
3. Hmblecomassib. rar in the packet can be used for test transceiver
PS:
Develop the mobile terminal of IOS or Android. Please visit http://www.jnhuamao.cn/download.asp? ID=0 download the latest source code, for reference!
-- Hm-10 module configuration, need USB to TTL device. No wireless pairing configuration! (Because after wireless pair, the data is transmitted directly) --
1. In the case that the LED is not paired with the remote device, it will flash slowly. In this case, the AT command can be used for module related configuration.
2. Hm-10 module can only recognize all uppercase AT commands, and does not support lowercase and mixed case writing.
3. The factory default baud rate is 96
1. Internal logic level conversion circuit. No need to externally convert 5V level to 3.3V level
2. Power input port with anti-circuit. Avoid module burn - out caused by accidental power plug - in.
Apple IOS5 /IOS6 support, please download the following information before you buy. Thank you very much!
Hm-10 module information package download :(ios 5/6 development source code, module AT instruction, etc., please download by yourself, thank you!)
Hm - 10 tutorial:
Several important points of IOS, I hope customers to use the module, first look at this document! Keep it in mind.
(Applicable to apple 4S, 5 and 5s after the machine)
For IOS:
1.IOS search for Bluetooth, not search and pair bluetooth in Settings - Bluetooth. (Only bluetooth headset can be connected in IOS Settings. Unable to find wireless data device)
2. Search LightBlue software through AppStore in IOS, and then open LightBlue software to find HM-10, and then match, test, send and receive it!
The android mobile phone
1. First, confirm whether the Bluetooth module of the Android phone hardware supports Bluetooth 4.0. (If the phone hardware module does not support it, the software can't do it correctly!)
2. System upgrade to version 4.3 or later
3. Hmblecomassib. rar in the packet can be used for test transceiver
PS:
Develop the mobile terminal of IOS or Android. Please visit http://www.jnhuamao.cn/download.asp? ID=0 download the latest source code, for reference!
-- Hm-10 module configuration, need USB to TTL device. No wireless pairing configuration! (Because after wireless pair, the data is transmitted directly) --
1. In the case that the LED is not paired with the remote device, it will flash slowly. In this case, the AT command can be used for module related configuration.
2. Hm-10 module can only recognize all uppercase AT commands, and does not support lowercase and mixed case writing.
3. The factory default baud rate is 96
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000