Hệ thống tưới nước sân vườn tự động micro có thể điều chỉnh

Features:
Easy installation and good water saving performance.
Fine atomizing nozzle, brass body with stainless steel core guide vanes.
The liquid forms a centrifugal vortex in the guide vanes, and fine hollow mist particles are ejected from the orifices.
Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog.
The nozzle hole of the nozzle is punched by the American precision punching machine, the hole diameter is 0.3mm, and the production cost is excellent, and the use cost is save more than 10 times compared with the gas humidification.
This series of nozzles does not require air assistance.
The system device is simple, the spray mist is fine, the atomization is sufficient, the saving and water saving, the cost is low, and the effect is good.
The stainless steel spray film is processed by advanced forging process and has strong durability. It is 2.5 times times the life of the same kind of nozzle.
The nozzle can be completely atomized by the pressure of the tap water, and the use of the high-pressure water pump is small and the effect is better.

Specification:
Material: Plastic
Length: 30m/98.42ft
Packing: OPP bag packaging
Application: Agriculture, lawns, villas, industrial irrigation, green belt watering, dehumidification.

Installation steps:
1. It is recommended to install the atomization system at a height of 2.5m-3m/8.2-9.84ft.
2. Connect the adapter to the faucet.
3. Turn on the faucet cleaning system for 1 minute to clean the system and remove impurities.
4. Screw the spray nozzle onto the tee fitting except the one at the end.
5. Turn on the faucet cleaning system for 2 minutes to ensure the system is completely cleaned.
6. Close the water and install the last nozzle onto the fitting and use the end plug.
7. The atomizing pipe is fixed by a cable tie saddle clip provided.
8. Turn on the faucet until the sprayer is working and enjoy the cooling atomization system.
9. When not using the atomization system for a long time, close the nozzle and keep it dry and clean.

Quantity:
1 X 30m/98.42ft 4/7 Hose
1 X Linker
2 X Internal Threaded Faucet Connecters
1 X Puncher
20 X Drippers
15 X Can Close the Dripper Heads
35 X Tees
30 X Double Barbs
15 X Single Barbs
35 X Support Rods

Notes:
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2.Please allow 1-3cm measuring deviation due to manual measurement.

Welcome to Justforyou ! There are varieties of products and desirable discount here!! Just for you!!
You will never want to miss it !! Besides ,if you have any questions or suggestions,don't hesitate to contact