Hệ Thống Cảm Biến Rung Động Chống Trộm Cho Xe Mô Tô
156.200
₫ 86.600
Sản phẩm Hệ Thống Cảm Biến Rung Động Chống Trộm Cho Xe Mô Tô đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 156.200 xuống còn ₫ 86.600, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specifications:
Material: ABS + electronics
Output current: ≤100mA (maximum load current)
Sensitivity: -105dB
Quiescent current: ≤6mA
Rated working voltage:DC 12V
Trigger pole number: unipolar trigger output
Interface mode: XH 2.54 or 2510 three wire interfaces
Trigger mode: negative trigger to ground or positive 12V trigger
Working voltage: DC 10V-16V
Sensitivity: the twist can be tested
Display mode: LED light red light display
Features:
The internal piezoelectric ceramic sheet and spring weight structure are used to detect the vibration signal, and the amplifier signal is amplified by the LM358 and output control signals.
It has the advantages of high sensitivity, stable and reliable operation, and large adjustable range of vibration detection.
On the anti-theft system of steam and motorcycle cars, 80% of vehicle alarms use such sensors.
The sensor uses SMT chip technology inside, and the imported components are assembled.
The sensor can also be combined with single-chip microcomputer, wireless transmitter module, wired alarm, etc.
It is used in combination and has a wide range of applications.
Package Included:
1X Motorcycle Vibration Sensor
1X Manual
Notes:
The colors may be a little difference for the different monitor display.
Please allow minor deviation due to manual measure
Material: ABS + electronics
Output current: ≤100mA (maximum load current)
Sensitivity: -105dB
Quiescent current: ≤6mA
Rated working voltage:DC 12V
Trigger pole number: unipolar trigger output
Interface mode: XH 2.54 or 2510 three wire interfaces
Trigger mode: negative trigger to ground or positive 12V trigger
Working voltage: DC 10V-16V
Sensitivity: the twist can be tested
Display mode: LED light red light display
Features:
The internal piezoelectric ceramic sheet and spring weight structure are used to detect the vibration signal, and the amplifier signal is amplified by the LM358 and output control signals.
It has the advantages of high sensitivity, stable and reliable operation, and large adjustable range of vibration detection.
On the anti-theft system of steam and motorcycle cars, 80% of vehicle alarms use such sensors.
The sensor uses SMT chip technology inside, and the imported components are assembled.
The sensor can also be combined with single-chip microcomputer, wireless transmitter module, wired alarm, etc.
It is used in combination and has a wide range of applications.
Package Included:
1X Motorcycle Vibration Sensor
1X Manual
Notes:
The colors may be a little difference for the different monitor display.
Please allow minor deviation due to manual measure
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000