Giá Đỡ Camera Cho Dji Phantom 4 Pro
₫ 863.600
Sản phẩm Giá Đỡ Camera Cho Dji Phantom 4 Pro đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
🐳🐳Welcome to {buildvitbghy}, your support is our greatest driving force, we will definitely give you the most comfortable shopping experience!!!🐳🐳
==========================={buildvitbghy}=========================
Tips 1:
Please note that these Motors is used. But it works because we tested before sell.
For now,nobody have this new these Motors because dji company forbid to sell.
Tips 2:
Kindly reminder: These parts require professionals and professional tools to replace. Especially the Y motor, it need professinal tool to fix and replace. We recommend that you check with your local professinal repairnan before buy it.
Tips 3:
If the gimbal camera doesn't fixed in the center after install the Y motor, pls following below steps to settle the problem.
Step 1: Measure the deviation angle of the gimbal camera;
Step 2: Measure and mark making on the counterclockwise direction of the metal plate (the one for motor, above the shock-absorbing plate, next to the flat cable);
Step 3: Drill a screw hole with an electric drill on the metal plate. (If the gimbal camera go to the left deviation of 45 degrees, then pls drill a hole of 45 degrees to the right.)
Step 4: Install the Y m
==========================={buildvitbghy}=========================
Tips 1:
Please note that these Motors is used. But it works because we tested before sell.
For now,nobody have this new these Motors because dji company forbid to sell.
Tips 2:
Kindly reminder: These parts require professionals and professional tools to replace. Especially the Y motor, it need professinal tool to fix and replace. We recommend that you check with your local professinal repairnan before buy it.
Tips 3:
If the gimbal camera doesn't fixed in the center after install the Y motor, pls following below steps to settle the problem.
Step 1: Measure the deviation angle of the gimbal camera;
Step 2: Measure and mark making on the counterclockwise direction of the metal plate (the one for motor, above the shock-absorbing plate, next to the flat cable);
Step 3: Drill a screw hole with an electric drill on the metal plate. (If the gimbal camera go to the left deviation of 45 degrees, then pls drill a hole of 45 degrees to the right.)
Step 4: Install the Y m
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000