DSVN 1Pc 3S 100A 11.1V 12V Lithium 18650 Battery Cell PCB Protection Board w/ Balance
₫ 84.000
Sản phẩm DSVN 1Pc 3S 100A 11.1V 12V Lithium 18650 Battery Cell PCB Protection Board w/ Balance đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our store desertwatersuper.vn!Wish you have a good shopping.
Product Description:
100% Brand New and High Quality
3 string 11.1V high current 100A, 3.7V ternary lithium battery protection board with balanced charge.
The lithium battery protection board properties:
Model: HX-3S-F100A
Size: 70 * 60 * 8.5mm
Overcharge voltage range: 4.28v ± 0.05v
Overpressure voltage range: 2.5 ± 0.05v
Upper limit working current: 100A (pay attention to heat)
Upper limit instantaneous current: 100-120A
Quiescent current: less than 30uA
Internal resistance: less than 300mΩ
Balance Current: 65 mA
Charging voltage: 12.6V-13V
Charge current limit: 10A
Short circuit protection: protection, delay self-recovery.
Operating temperature: -40 --- +50 ℃
Storage conditions: -40-- +80 ℃
Effective life: more than 30,000 hours
T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection, need to remove the solder joint next to the 0R resistance.
Note: 3A current above the discharge products, the battery discharge rate to 3C or more
Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
In the use of the battery will heat is Battery magnification is not applicable, this situation can not be long-term use, the battery will soon be damaged.
Note 1: Strictly according to Figure 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B +), C-charge negative, C + charge positive, P-output negative, P + Short connect!
Note 2: after wiring, it needs to charge first, then will have output.
Note 3: When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. Discharge test, the voltage drop is fast that group of batteries is poor battery.
Explain: Do not put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better!
(2 good batteries + 1 poor battery use effect = 3 poor battery use effect).
Package Included:1x 3S Lithium 18650 Battery Protection Board W/ Ba
Product Description:
100% Brand New and High Quality
3 string 11.1V high current 100A, 3.7V ternary lithium battery protection board with balanced charge.
The lithium battery protection board properties:
Model: HX-3S-F100A
Size: 70 * 60 * 8.5mm
Overcharge voltage range: 4.28v ± 0.05v
Overpressure voltage range: 2.5 ± 0.05v
Upper limit working current: 100A (pay attention to heat)
Upper limit instantaneous current: 100-120A
Quiescent current: less than 30uA
Internal resistance: less than 300mΩ
Balance Current: 65 mA
Charging voltage: 12.6V-13V
Charge current limit: 10A
Short circuit protection: protection, delay self-recovery.
Operating temperature: -40 --- +50 ℃
Storage conditions: -40-- +80 ℃
Effective life: more than 30,000 hours
T point Description: plus a normally closed temperature sensor switch can expand the role of temperature protection, need to remove the solder joint next to the 0R resistance.
Note: 3A current above the discharge products, the battery discharge rate to 3C or more
Magnification calculation formula: 1C magnification of the battery, 2000 capacity is equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
In the use of the battery will heat is Battery magnification is not applicable, this situation can not be long-term use, the battery will soon be damaged.
Note 1: Strictly according to Figure 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B +), C-charge negative, C + charge positive, P-output negative, P + Short connect!
Note 2: after wiring, it needs to charge first, then will have output.
Note 3: When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. Discharge test, the voltage drop is fast that group of batteries is poor battery.
Explain: Do not put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better!
(2 good batteries + 1 poor battery use effect = 3 poor battery use effect).
Package Included:1x 3S Lithium 18650 Battery Protection Board W/ Ba