Đồng Hồ Gắn Tay Lái Xe Đạp Có Nam Châm
₫ 919.400
Sản phẩm Đồng Hồ Gắn Tay Lái Xe Đạp Có Nam Châm đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Price for 1 package
> > 0.01mm dial tolerance indicator
> > magnetic dial stand base
A dial indicator gage is a measure with a very small scale of measurement. These measurements cannot stand alone., Where nature is used, Tool Here Must Paired With Tool Help Yang Called Magnetic Base As Holder And Functioning To Set Position From Dial Gage Like So low And The tilt. In general, The dial indicator function is to measure flat plane surface level, The roundness of a shaft, It measures the surface level and measures the surface level of the cylinder wall.
The steps:
1. Installl contact point on the indicator dial
2.Then put the dial indicator on the stand.
3.Attach contact point to a work object or object to be measured
4.Loosen the binding screw on the scale and position the zero parallel to the pointing needle. Then tighten the screw tie back
5.Move the workforce according to the need
6. And finally read the value of deviating the pointer needle on the scale
#Dialindicatordanmagneticdial
#Magneti
> > 0.01mm dial tolerance indicator
> > magnetic dial stand base
A dial indicator gage is a measure with a very small scale of measurement. These measurements cannot stand alone., Where nature is used, Tool Here Must Paired With Tool Help Yang Called Magnetic Base As Holder And Functioning To Set Position From Dial Gage Like So low And The tilt. In general, The dial indicator function is to measure flat plane surface level, The roundness of a shaft, It measures the surface level and measures the surface level of the cylinder wall.
The steps:
1. Installl contact point on the indicator dial
2.Then put the dial indicator on the stand.
3.Attach contact point to a work object or object to be measured
4.Loosen the binding screw on the scale and position the zero parallel to the pointing needle. Then tighten the screw tie back
5.Move the workforce according to the need
6. And finally read the value of deviating the pointer needle on the scale
#Dialindicatordanmagneticdial
#Magneti
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000