Động Cơ Servo Futaba S3003
₫ 133.500
Sản phẩm Động Cơ Servo Futaba S3003 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Futaba description s3003 servo motor
A servo motor is a rotary actuator that allows for precise control of the angular position. It consists of a motor coupled to a sensor for position feedback. It also requires a servo drive to complete the system. The drive uses the feedback sensor to precisely control the rotary position of the motor. This is called a closed-loop operation. By running the system closed-loop servo motors provide a high-performance alternative to stepper and ac induction motors.
Features / specs:
+ pulse width control 1520usec neutral
Current drain (4.8v): 7.2ma / idle
Required pulse: 3-5 volt peak to peak square wave
Current drain (6.0v): 8ma / idle
Operating voltage: 4.8-6.0 volts.
Direction: Counter clockwise / pulse traveling 1520-1900usec
Operating temperature range: - 20oc to + 60oc
Type: 3 pole ferrite motor
Operating speed (4.8v): 0.23sec / 60 degrees at no load
Indirection drive potentiometer
Operating speed (6.0v): 0.19sec / 60 degrees at no load
Plastic bearing type: Bearing
Stall torque (4.8v): 44 oz / in. (3.2kg.cm)
Gear type: All nylon gears
Stall torque (6.0v): 56.8 oz / in. (4.1kg.cm)
12 length wire connector
Operating angle: 45 deg. One side pulse traveling 40
A servo motor is a rotary actuator that allows for precise control of the angular position. It consists of a motor coupled to a sensor for position feedback. It also requires a servo drive to complete the system. The drive uses the feedback sensor to precisely control the rotary position of the motor. This is called a closed-loop operation. By running the system closed-loop servo motors provide a high-performance alternative to stepper and ac induction motors.
Features / specs:
+ pulse width control 1520usec neutral
Current drain (4.8v): 7.2ma / idle
Required pulse: 3-5 volt peak to peak square wave
Current drain (6.0v): 8ma / idle
Operating voltage: 4.8-6.0 volts.
Direction: Counter clockwise / pulse traveling 1520-1900usec
Operating temperature range: - 20oc to + 60oc
Type: 3 pole ferrite motor
Operating speed (4.8v): 0.23sec / 60 degrees at no load
Indirection drive potentiometer
Operating speed (6.0v): 0.19sec / 60 degrees at no load
Plastic bearing type: Bearing
Stall torque (4.8v): 44 oz / in. (3.2kg.cm)
Gear type: All nylon gears
Stall torque (6.0v): 56.8 oz / in. (4.1kg.cm)
12 length wire connector
Operating angle: 45 deg. One side pulse traveling 40
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000