Động Cơ Bước 4 Trục Nema 17 Động Cơ Bước 20mm 1a 13ncm (18.4Oz.In) 42 Motor Nema17 Cho Máy In 3d Cnc Xyz
₫ 119.610
Sản phẩm Động Cơ Bước 4 Trục Nema 17 Động Cơ Bước 20mm 1a 13ncm (18.4Oz.In) 42 Motor Nema17 Cho Máy In 3d Cnc Xyz đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Short Height
13Ncm(18.4oz.in) holding torque
FOR NEMA 17 bipolar 1.65 inchx1.65 inchx0.79 inch 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 1.0A & resistance 3.5ohms
This is Short Height FOR Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws current 1A, allowing for a holding torque of 13Ncm(18.4oz.in).
Color: sier
material: metal
Electrical Specification:
Manufacturer Part Number: 17HS08-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg.
Holding Torque: 13Ncm(18.4oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.5ohms
Inductance: 4.5mH+/-20%(1KHz)
Physical Specification:
Frame Size: 42 x 42mm
Body Length: 20mm
Shaft Diameter: 5mm
Shaft Length: 20mm
D-cut Length: 16.5mm
Number of Leads: 4
Lead Length: 400mm
Weight: 140g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Package Contents:1* stepper motorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
13Ncm(18.4oz.in) holding torque
FOR NEMA 17 bipolar 1.65 inchx1.65 inchx0.79 inch 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 1.0A & resistance 3.5ohms
This is Short Height FOR Bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws current 1A, allowing for a holding torque of 13Ncm(18.4oz.in).
Color: sier
material: metal
Electrical Specification:
Manufacturer Part Number: 17HS08-1004S
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg.
Holding Torque: 13Ncm(18.4oz.in)
Rated Current/phase: 1.0A
Phase Resistance: 3.5ohms
Inductance: 4.5mH+/-20%(1KHz)
Physical Specification:
Frame Size: 42 x 42mm
Body Length: 20mm
Shaft Diameter: 5mm
Shaft Length: 20mm
D-cut Length: 16.5mm
Number of Leads: 4
Lead Length: 400mm
Weight: 140g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Package Contents:1* stepper motorOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1