Động Cơ Bước 12v 80mm Cho Máy Khắc Laser Diy
368.600
₫ 206.200
Sản phẩm Động Cơ Bước 12v 80mm Cho Máy Khắc Laser Diy đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 368.600 xuống còn ₫ 206.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Made of high quality material, practical, easy to installl and use, wide application scope, long service life.
Characteristics:
Made of high-quality steel, wear-resistant, high hardness, long service life.
Widely used in small equipment such as medical equipment, laser engraving machine and so on.
Diy installlation can improve your hands-on ability.
The motor needs a 4988 drive (not attached) to drive and the motor cannot be connected directly to the power supply.
The maximum line speed is 25 mm per second.
Specifications:
Material: steel
Color: silver
Model no. d8-motorola80
Rated voltage: 9-12v
Screw rod diameter: 3mm/0.1 inch
Screw length: 90mm/3.5 in
Slider travel: 80 mm/3.1 inch
Drive mode: bipolar drive
Screw pitch: 0.5 mm/0.02 in (move 0.025 mm first, use microstep drive if smaller)
Driving voltage: 12v dc
Per phase current: 800 ma/phase
Coil resistance: 15,10%/phase
Phase number: 2 phase
Stepping angle: 18./step
Excitation mode: 1-2 phase excitation
Pull out thrust: over 500pp, 125 pps
Maximum response frequency: over 1600 pps
Maximum start frequency: over 1100 pps
Insulation level: level e
Insulation strength: 100v ac 1 sec
Insulation resistance: 50m dc 500v
Working temperature: 0°C+55°C
Surface temperature of motor: 80°C
Product size: 105x15mm/4.1x0.6 in
Product weight: 46 g/1.6oz
Packaging size: 130x35 x 35mm/5.1x1.4x1.4 in
Packing weight: 55 g/1.9oz
Notes:
The motor needs to be driven by the drive, not directly connected to the power supply.
Packing list:
1 x linear sliding
Characteristics:
Made of high-quality steel, wear-resistant, high hardness, long service life.
Widely used in small equipment such as medical equipment, laser engraving machine and so on.
Diy installlation can improve your hands-on ability.
The motor needs a 4988 drive (not attached) to drive and the motor cannot be connected directly to the power supply.
The maximum line speed is 25 mm per second.
Specifications:
Material: steel
Color: silver
Model no. d8-motorola80
Rated voltage: 9-12v
Screw rod diameter: 3mm/0.1 inch
Screw length: 90mm/3.5 in
Slider travel: 80 mm/3.1 inch
Drive mode: bipolar drive
Screw pitch: 0.5 mm/0.02 in (move 0.025 mm first, use microstep drive if smaller)
Driving voltage: 12v dc
Per phase current: 800 ma/phase
Coil resistance: 15,10%/phase
Phase number: 2 phase
Stepping angle: 18./step
Excitation mode: 1-2 phase excitation
Pull out thrust: over 500pp, 125 pps
Maximum response frequency: over 1600 pps
Maximum start frequency: over 1100 pps
Insulation level: level e
Insulation strength: 100v ac 1 sec
Insulation resistance: 50m dc 500v
Working temperature: 0°C+55°C
Surface temperature of motor: 80°C
Product size: 105x15mm/4.1x0.6 in
Product weight: 46 g/1.6oz
Packaging size: 130x35 x 35mm/5.1x1.4x1.4 in
Packing weight: 55 g/1.9oz
Notes:
The motor needs to be driven by the drive, not directly connected to the power supply.
Packing list:
1 x linear sliding
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000