(Đang Bán) Bộ Dụng Cụ Kiểm Tra Hệ Thống Đánh Lửa Cho Xe Hơi
₫ 261.000
Sản phẩm (Đang Bán) Bộ Dụng Cụ Kiểm Tra Hệ Thống Đánh Lửa Cho Xe Hơi đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Quickly diagnose problems with all systems,Connect the tool between the spark plug and the plug wire
Normal sparks of fire gauges as"purple blue and 2cm straight line,"if the coil is bad when the color is red or curve
Use this spark tester to check the condition of the system at each cylinder without going to expensive mechanics.The spark tester connects between the spark plug and spark plug wire in seconds to troubleshoot dirty spark plug connections,defective points and bad cables or connections.Connects in seconds.
Colour:Black
material:plastic
Size:Jumping distance is about 0.8-1.5cm
Package Contents:
1pcs * Spark plug testerOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Normal sparks of fire gauges as"purple blue and 2cm straight line,"if the coil is bad when the color is red or curve
Use this spark tester to check the condition of the system at each cylinder without going to expensive mechanics.The spark tester connects between the spark plug and spark plug wire in seconds to troubleshoot dirty spark plug connections,defective points and bad cables or connections.Connects in seconds.
Colour:Black
material:plastic
Size:Jumping distance is about 0.8-1.5cm
Package Contents:
1pcs * Spark plug testerOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1