Công Tắc Phao 2m Tự Động Bơm Nước
₫ 390.600
Sản phẩm Công Tắc Phao 2m Tự Động Bơm Nước đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
- 2 meters long cable
- cable material: Pvc + copper.
Max. Current: 4a - 8a.
- pressure: 0.6-1 mpa.
- max temp: 70 c.
- working temp: 0-50 c.
- waterproof grade: Ip 68.
- switch body: 100% new pp.
These float switches are often used to replace other types of automatic lifeboats that are not durable (Not durable to use) Because the pump 's too big.
The connection system of this float switch uses plate and metal ball as is generally automatic at the pump dipper, It can withstand a large amount of power or can be passed by a large current, which is more durable than any other type of water floater.
Although it is generally used only in 1 function, it has 2 functions in operation to control on and off water pumps automatically based on the level of water level.
- a. On the drained moment and off when it 's fully loaded.
- b. On the moment it 's filled and off as it drains out.
So it can be used as necessary, for conditions a or b.
Can be used for:
- a. Keeping the water in toren is not lubricated when the pump fills the water into toren and automatically fills the water into toren as the water in toren begins to run out.
To arrange for water pumps to be automatically on and off at the desired water level is by pulling or stalling the cable associated with an orange ballast point filled with sand.
5 meters cable is also avail
- cable material: Pvc + copper.
Max. Current: 4a - 8a.
- pressure: 0.6-1 mpa.
- max temp: 70 c.
- working temp: 0-50 c.
- waterproof grade: Ip 68.
- switch body: 100% new pp.
These float switches are often used to replace other types of automatic lifeboats that are not durable (Not durable to use) Because the pump 's too big.
The connection system of this float switch uses plate and metal ball as is generally automatic at the pump dipper, It can withstand a large amount of power or can be passed by a large current, which is more durable than any other type of water floater.
Although it is generally used only in 1 function, it has 2 functions in operation to control on and off water pumps automatically based on the level of water level.
- a. On the drained moment and off when it 's fully loaded.
- b. On the moment it 's filled and off as it drains out.
So it can be used as necessary, for conditions a or b.
Can be used for:
- a. Keeping the water in toren is not lubricated when the pump fills the water into toren and automatically fills the water into toren as the water in toren begins to run out.
To arrange for water pumps to be automatically on and off at the desired water level is by pulling or stalling the cable associated with an orange ballast point filled with sand.
5 meters cable is also avail