Công tắc ngắt nước tự động YORK 1 "x 3/4"
₫ 528.900
Sản phẩm Công tắc ngắt nước tự động YORK 1 "x 3/4" đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
The YORK water flow switch is an automatic switch water pump that uses a motion-controlled sensor (flow switch) best fitted to all types of water pump used to push water from the top down / water reservoir Inside the intel pipeline that can flow when the tap is opened, because it automatically works by detecting the flow of water (water flows, pump on and water stops flowing, pump off)
Many Flow switches are attached to Booster pumps or thrusters, but they can be applied using a common pump (not Booster pumps) that can save you a lot of money, as most Booster pumps are more expensive than regular pumps. With a regular Pump you can choose as you need, it can Pump shallow water wells, Jet pumps, even a dip Pump.
Flow switches are particularly suitable as an alternative solution to Pressure switches that are usually installled in water pumps, which are often complained about sounding "print-and-tock", in addition to noise and waste of electricity. Who have tried this Flow Switch, they are satisfied to no longer hear the "print-check" sound on the water pump.
Specs:
- Drat Inlet: 1 "
- Drat Outlet: 3 / 4 "
- Rated Voltage: AC 220V / 50Hz
- Peak Current: 5A (max power: 1100W)
- Start operation Current: 2A (440W)
- Start operation Pressure: 0.03mpa
- max.temperature: 80 degrees celsius.
~ high quality brass automatic body (kotosi-resistant when used for saltwater)
~ the component of the shorttesi sensor is tightly corroded, so that in the filing it is safe enough to be sprinkled with water.
~ wearing a flexible o-ring can withstand heat up to 200 degrees celsius.
~ the body of the sensor and tongue components is made of pelastic material that can withstand heat 110 degrees celsius.
Thank you for your visit.
- not a log, we 'll send random.
- ask stock before order
Have a subscripti
Many Flow switches are attached to Booster pumps or thrusters, but they can be applied using a common pump (not Booster pumps) that can save you a lot of money, as most Booster pumps are more expensive than regular pumps. With a regular Pump you can choose as you need, it can Pump shallow water wells, Jet pumps, even a dip Pump.
Flow switches are particularly suitable as an alternative solution to Pressure switches that are usually installled in water pumps, which are often complained about sounding "print-and-tock", in addition to noise and waste of electricity. Who have tried this Flow Switch, they are satisfied to no longer hear the "print-check" sound on the water pump.
Specs:
- Drat Inlet: 1 "
- Drat Outlet: 3 / 4 "
- Rated Voltage: AC 220V / 50Hz
- Peak Current: 5A (max power: 1100W)
- Start operation Current: 2A (440W)
- Start operation Pressure: 0.03mpa
- max.temperature: 80 degrees celsius.
~ high quality brass automatic body (kotosi-resistant when used for saltwater)
~ the component of the shorttesi sensor is tightly corroded, so that in the filing it is safe enough to be sprinkled with water.
~ wearing a flexible o-ring can withstand heat up to 200 degrees celsius.
~ the body of the sensor and tongue components is made of pelastic material that can withstand heat 110 degrees celsius.
Thank you for your visit.
- not a log, we 'll send random.
- ask stock before order
Have a subscripti
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000