[Mã SKAMA06 giảm 8% đơn 250k]Bo mạch SIM7020E NB-IoT HAT (dùng cho Raspberry Pi)
₫ 800.000
Sản phẩm [Mã SKAMA06 giảm 8% đơn 250k]Bo mạch SIM7020E NB-IoT HAT (dùng cho Raspberry Pi) đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
NB-IoT HAT for Raspberry Pi, Based on SIM7020E, B1/B3/B5/B8/B20/B28 Bands
Applicable Region
SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.
Please check the supported bands according to your local service provider when placing order.
Overview
This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.
Features
Raspberry Pi connectivity, compatible with any revision
Supports communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.
Onboard USB interface, for power supply OR debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
SIM card slot, supports NB-IoT specific card
2x LED indicators, easy to monitor the working status
Baudrate: 300bps~921600bps (115200bps by default)
Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32/Python)
Communications Specifications
Band
FDD-LTE B1/B3/B5/B8/B20/B28
Data rate
Uplink≤62.5Kbps
Downlink≤26.15Kbps
SMS
Text mode and PDU mode (depends on the NB card)
General Specifications
Power supply: 5V
Logic level: 5V/3.3V (3.3V by default)
Overall current (idle mode): ~18mA
Single module current (VBAT=3.3V):
Idle mode: 5.6mA
Sleep mode: 0.4mA
PSM mode: 5uA
eDRX mode: 70uA (eDRX=655.36s)
Dimension: 30.5mm x 65.0mm
#proe
#Sim
Applicable Region
SIM7020E is mainly applicable in Europe, Asia, Africa, Australia.
Please check the supported bands according to your local service provider when placing order.
Overview
This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, and so on.
Features
Raspberry Pi connectivity, compatible with any revision
Supports communication protocols such as LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS, etc.
Onboard USB interface, for power supply OR debugging
Breakout UART control pins, to connect with host boards like Arduino/STM32
Onboard voltage translator, 3.3V by default, allows to be switched to 5V via onboard jumper
SIM card slot, supports NB-IoT specific card
2x LED indicators, easy to monitor the working status
Baudrate: 300bps~921600bps (115200bps by default)
Control via AT commands (V.25TER, 3GPP TS 27.007, and SIMCOM AT Commands)
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32/Python)
Communications Specifications
Band
FDD-LTE B1/B3/B5/B8/B20/B28
Data rate
Uplink≤62.5Kbps
Downlink≤26.15Kbps
SMS
Text mode and PDU mode (depends on the NB card)
General Specifications
Power supply: 5V
Logic level: 5V/3.3V (3.3V by default)
Overall current (idle mode): ~18mA
Single module current (VBAT=3.3V):
Idle mode: 5.6mA
Sleep mode: 0.4mA
PSM mode: 5uA
eDRX mode: 70uA (eDRX=655.36s)
Dimension: 30.5mm x 65.0mm
#proe
#Sim