Bo Mạch Chủ Epson E09A92Ga Ic6 Power Ic6 L300 L310 L350 L355 L360 Fpts1607
310.700
₫ 267.200
Sản phẩm Bo Mạch Chủ Epson E09A92Ga Ic6 Power Ic6 L300 L310 L350 L355 L360 Fpts1607 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 310.700 xuống còn ₫ 267.200, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Epson l120 ic power printer l110 ic power epson e09a92ga epson l220 ic power
Specs:
New
Code: E09a92ga
Without warranty
Type printer support:
Epson l110.
Epson l120.
Epson l130.
Epson l210.
Epson l220.
Epson l300.
Epson l310.
Epson l350.
Epson l355
Epson l360.
Epson l365.
Epson l380.
Epson l385.
Epson l405.
Epson l455
Epson l485.
Epson l550.
Epson l555
Epson l565.
Description of damage to ic power:
Check the ic tr first when the motherboard dies.
If the ic tr dies and the mainboard 's been replaced, there' s a good chance the damage is on the ic power.
Print results can also be caused by ic power
How to installl ic power:
Ice cream feet with flux
Soldering iron with little tin, make sure tin is joined to the ic leg, this is done because the ic leg has never been hit by tin (soldering the ic power leg will take longer than the eeprom ic)
Installl ic to the board according to its position, don 't reverse
Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x
Hot ic can be damaged and blink 9x too
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to bre
Specs:
New
Code: E09a92ga
Without warranty
Type printer support:
Epson l110.
Epson l120.
Epson l130.
Epson l210.
Epson l220.
Epson l300.
Epson l310.
Epson l350.
Epson l355
Epson l360.
Epson l365.
Epson l380.
Epson l385.
Epson l405.
Epson l455
Epson l485.
Epson l550.
Epson l555
Epson l565.
Description of damage to ic power:
Check the ic tr first when the motherboard dies.
If the ic tr dies and the mainboard 's been replaced, there' s a good chance the damage is on the ic power.
Print results can also be caused by ic power
How to installl ic power:
Ice cream feet with flux
Soldering iron with little tin, make sure tin is joined to the ic leg, this is done because the ic leg has never been hit by tin (soldering the ic power leg will take longer than the eeprom ic)
Installl ic to the board according to its position, don 't reverse
Imperfect installlation (tin is not fused on the ic leg). Resulting in error or blink 9x
Hot ic can be damaged and blink 9x too
Please be careful when removing the ic, because if too hot the blower is used then the other components are damaged which causes the mainboard to fail or the pcb path to bre
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000