Bộ linh kiện máy in 3D mega2560 Module + RAMPS 1.4 + 5xa4988 + 3xendstop cho Arduino Reprap
₫ 608.000
Sản phẩm Bộ linh kiện máy in 3D mega2560 Module + RAMPS 1.4 + 5xa4988 + 3xendstop cho Arduino Reprap đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
This kit is matched easonable and the materials of components are excellent
This is the most suitable Kit designed for the 3D Printer
This Kit is not just a bulk of components,but is all the hardware and software which starter requires
You can 3D Printer Kit and the technical support
The 3D Ramps 1.4 Board
The 3D MEGA2560 Module(CLANNAD)
Microcontroller: ATmega2560
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 14 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
Download the Arduino Software Here, please contact us.
Colour: Photo Color
Material: PC+ metal
Package included:
1*3D RAMPS 1.4 Board with plugs
1*3D MEGA2560 Module
1*USB Cable For MEGA2560
5*Pcs 3D A4988 Motor Driver
5*Cooling Sink
3*Pcs 3D Mechanical End Stop Sensors With lines
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
This is the most suitable Kit designed for the 3D Printer
This Kit is not just a bulk of components,but is all the hardware and software which starter requires
You can 3D Printer Kit and the technical support
The 3D Ramps 1.4 Board
The 3D MEGA2560 Module(CLANNAD)
Microcontroller: ATmega2560
Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 14 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16 MHz
Download the Arduino Software Here, please contact us.
Colour: Photo Color
Material: PC+ metal
Package included:
1*3D RAMPS 1.4 Board with plugs
1*3D MEGA2560 Module
1*USB Cable For MEGA2560
5*Pcs 3D A4988 Motor Driver
5*Cooling Sink
3*Pcs 3D Mechanical End Stop Sensors With lines
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000