Bộ Điều Khiển Tốc Độ Cao 2551 MCP2551
₫ 26.400
Sản phẩm Bộ Điều Khiển Tốc Độ Cao 2551 MCP2551 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Cjmcu - 2551 mcp2551 high speed can communication protocol controller bus interface module
Cjmcu-2551 is a fault-tolerant high-speed can device, which can be used as an interface between can protocol controller and physical bus.Mcp 2551 provides differential transceiver capabilities for can protocol controllers, which fully meet iso-11898 standards, including 24v voltage requirements.
Typically, each node on the can system must have a device to convert the digital signal generated by the can controller into a signal suitable for bus transmission.It also provides a buffer between the high-pressure peak signals on the can controller and the can bus, which may be generated by external devices.
Support 1 mb/s operating rate.
Meet iso-11898 standard physical layer requirements.
Suitable for 12v and 24v systems.External control of slope, reduce rfi.
Grounding error at the txd input end is detected automatically.
Upper power reset and voltage event underpressure protection.
Failure to access the electrical node or underpressure does not affect the can bus.
Low current standby operation.
Connectable nodes up to
Cjmcu-2551 is a fault-tolerant high-speed can device, which can be used as an interface between can protocol controller and physical bus.Mcp 2551 provides differential transceiver capabilities for can protocol controllers, which fully meet iso-11898 standards, including 24v voltage requirements.
Typically, each node on the can system must have a device to convert the digital signal generated by the can controller into a signal suitable for bus transmission.It also provides a buffer between the high-pressure peak signals on the can controller and the can bus, which may be generated by external devices.
Support 1 mb/s operating rate.
Meet iso-11898 standard physical layer requirements.
Suitable for 12v and 24v systems.External control of slope, reduce rfi.
Grounding error at the txd input end is detected automatically.
Upper power reset and voltage event underpressure protection.
Failure to access the electrical node or underpressure does not affect the can bus.
Low current standby operation.
Connectable nodes up to