Bộ Điều Khiển Sạc Năng Lượng Mặt Trời Mppt 10a Lcd 12v 24v Màn Hình Lcd

Package Included:
1 * MPPT Solar Controller
1 * User manual
1 * Temperature sensor
Specifications:
Parameters / model ： MPPT10
Maximum current power ： 10A
Installation Lin (mm2) ： 4mm2
Installation line (AWG) ： 10 (AWG)
Weight ： 280g
Dimensions ： 143 × 89 × 46 (mm)
Load loss system ： ≤13mA
Loop Buck ： ≤100mV
Charging mode ： MPPT + PWM mode
Operating temperature ： -10 degrees Celsius ~ 60 degrees Celsius
Storage temperature ： -30 degrees Celsius ~ 70 degrees Celsius
Moisture requirements ： ≤90% non-condensing
Temperature compensation ： -4mV / cellular / degrees Celsius
Temperature probe (integrated components) ： NTC 100 K thermistats
Standard battery voltage ： 12V 12V
Battery capacity ： ≥100AH
Description:
MPPT 10A / 20A / 30A solar controllers are used in solar photovoltaic systems to coordinate solar panels, batteries and loads. It is a very important component in photovoltaic systems. It is different from other solar controllers in that it adds comprehensive protection functions to enable the entire solar photovoltaic system to operate efficiently and safely.
MPPT 10A / 20A / 30A solar controller can automatically adjust the working voltage of the solar panel, so that the solar panel will work consistently at the maximum power point of the V-A characteristic curve throughout the day. Compared with ordinary solar controllers, it has a temperature compensation function, which can improve the working efficiency of photovoltaic modules by 30%, and can significantly extend the battery life.
MPPT 10A:
MPPT 10A Solar Panel Charge Controller Regulator Solar Panel 130W / 12V 260W / 24V
Compatible with 260W (24v) solar panel, with dark activation function, maximum current is 10A timer projection (lighting function)
Compared with ordinary solar charging controller, this MPPT controller can improve efficiency by 10% -30%
Solar LCD series is an intelligent, multifunctional solar charge and discharge controller
1. LCD display
2. Simple operation interface
3. MPPT + PWM charging mode (the controller provides MPPT maximum power point tracking function, and the charging mode is PWM)
4. Parameter user can reset
5, one click to open and close the load
6, the key to restore factory settings
7, battery reverse discharge protection
8, battery reverse polarity protection
9, battery undervoltage protection
10, overload, short circuit protection
11, automatic temperature compensation function
12, can charge and discharge at the same time, always keep the battery fully charged
13, the mobile phone USB 5V charging (1500mA). (Only MPPT 30A with