Bộ điều khiển sạc năng lượng mặt trời 12V 24V 10A LCD với ánh sáng và bộ hẹn giờ kép T10

This is a three-time controller into the evening working time,an interval of rest of pause time,Dawn working time(morning light function), the user can according to their needs,set a different time
This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA

LCD screen display Battery reverse discharge protection
Easy operation interface Battery reverse polarity protection
MPPT+ PWM charging mode Battery under voltage protection
Parameter user can reset Overload Short-circuit protection
A key to restore the factory settings USB 5V charging (for 500mA) for mobile phone
A key to open and close the load Automatic temperature compensation function
Parameters / Model T10 T20 T30 T40
Maximum power current 12A 20A 30A 40A
Installation Lin mm2 4mm2 8mm2 10mm2 12mm2
Installation Line(AWG) 10(AWG) 8(AWG) 7(AWG) 6(AWG)
Weight 280g 300g 475g 480
Dimensions 143×89×46 mm 187*97*61 mm
System load loss ≤13mA
Loop Buck ≤100mV
Battery float voltage 13.8V 12V system /27.6V 24V system
Battery under voltage) protection 10.6V 12V system /21.2V 24V system
Battery (under voltage) recovery voltage 12.6V 12V system /25.2V 24V system
Charge mode MPPT+PWM MODE
Operating Temperature -10~60°C
Storage Temperature -30~70°C
Humidity requirements ≤90%, No condensation
Temperature compensation -4mV/Cell/°C
Temperature Probe (built componen NTC 100K thermistats
Maximum open circuit voltage of the solar panel 18V-24V 12V system 36V-48V 24V system)
Solar panels maximum open circuit voltage (V) ≤