Bộ Cảm Biến Mực Máy In 3d Cảm Ứng Tự Động Chuyên Dụng
820.100
₫ 426.900
Sản phẩm Bộ Cảm Biến Mực Máy In 3d Cảm Ứng Tự Động Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 820.100 xuống còn ₫ 426.900, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
✨Thank you for visiting our shop!
👉China's most professional electric equipment wholesale manufacturer, follow us to get more s and information!
Give us ⭐⭐⭐⭐⭐ good reviews and get exclusive s!
Features:
Hall effect provids high precision performance to the printer, suitable for most heatbed materials, such as glasses, metals, etc.
Helps improve the quality of printing and bed adhesion. Adjusts all movement to follow the tilt or contours of the bed, giving enjoyable printing experince for you.
The 3DTouch auto leveling sensor is a device that uses the Hall effect to achieve leveling.
The position of the point can be obtained by touching the point on the heatbed, and then compensated by adjusting the z-axis height during printing.
Printing can also be achieved even though the platform is not flat.
Note:
The auto leveling sensor is not plug and play. Modification is required to your firmware and control board, and soldering work to the connector may needed as well.
Specifications:
Material: Electronic Material
Color: White
Voltage: 5V
Current: 15mA
Peak Current: 300mA
Cable Length: 200mm(short), 1000mm(long)
Wiring: 3pin: Green(-, GND), Red(+5V), Orange(signal); 2pin: Black(-, GND), White(Zmin)
Item Size: 3.6*2.6*13cm / 1.41*1.02*5.11in
Package Size: 14.5*9.5*1.5cm / 5.7*3.74*0.59in
Package Weight: 24g / 0.84oz
Packing List:
1 * Sensor
1 * Screw Pack
1 *
👉China's most professional electric equipment wholesale manufacturer, follow us to get more s and information!
Give us ⭐⭐⭐⭐⭐ good reviews and get exclusive s!
Features:
Hall effect provids high precision performance to the printer, suitable for most heatbed materials, such as glasses, metals, etc.
Helps improve the quality of printing and bed adhesion. Adjusts all movement to follow the tilt or contours of the bed, giving enjoyable printing experince for you.
The 3DTouch auto leveling sensor is a device that uses the Hall effect to achieve leveling.
The position of the point can be obtained by touching the point on the heatbed, and then compensated by adjusting the z-axis height during printing.
Printing can also be achieved even though the platform is not flat.
Note:
The auto leveling sensor is not plug and play. Modification is required to your firmware and control board, and soldering work to the connector may needed as well.
Specifications:
Material: Electronic Material
Color: White
Voltage: 5V
Current: 15mA
Peak Current: 300mA
Cable Length: 200mm(short), 1000mm(long)
Wiring: 3pin: Green(-, GND), Red(+5V), Orange(signal); 2pin: Black(-, GND), White(Zmin)
Item Size: 3.6*2.6*13cm / 1.41*1.02*5.11in
Package Size: 14.5*9.5*1.5cm / 5.7*3.74*0.59in
Package Weight: 24g / 0.84oz
Packing List:
1 * Sensor
1 * Screw Pack
1 *
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000