Bộ Cảm Biến Màn Hình Đường Kính 1.75mm Chuyên Dụng Cho Máy In 3d
431.149
₫ 271.623
Sản phẩm Bộ Cảm Biến Màn Hình Đường Kính 1.75mm Chuyên Dụng Cho Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 431.149 xuống còn ₫ 271.623, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
3D Printer Parts 1.75mm Diameter Filament Monitor Sensor Set Detect Stuck Filament with PTFE Tubing Compatible with Duet 2 Wifi
Features:
The Duet3D Filament Monitor uses a IR optical motion detector to detect filament movement. The detected movement is transmitted to the Duet 2 Wifi, Ethernet or Maestro which uses the indicated movement to determine if the filament has run out, jammed or been ground away in the extruder. It is available for 1.75mm diameter filament only.
The monitor PCB comes with two Molex KK-style 3 way plugs and pins, along with ~60mm of Capricorn XS Ultra Low Friction PTFE tubing to act as the filament guide.
The Filament Monitor uses two printed parts to constrain the filament so that it passes over the centre of the the optical sensor at the correct height. Inlet and outlet PTFE tubes are clamped between these two parts. They must be printed in black filament.
Note: The Filament Monitor is sensitive to the filament type used, it has proved less sensitive to PETG of certain types.
Warning: The Filament Monitor is a Class 1 light device: Under normal conditions, the light beam is always below the IEC/EN 60825-1:2014 maximum permitted output level of 716uW according to the manufacturer of the optical sensor; nevertheless we advise against looking into the beam when the filament monitor is powered. You should most definitely not look at the sensor through magnification when it is operating. The beam is invisible infra red, therefore your eye blink reflex will not protect you.
Specifications:
Material: Plastic + Metal
Package Size: 20.0 * 15.2 * 1.0cm / 7.9 * 6.0 * 0.4in
Package Weight: 38g / 1.3oz
Packing List:
1 * Filament Monitor
2 * M3x25 Screw
2 * M3 Net
2 * Printed Parts
1 * 1M 4mm OD x 1.9mm ID PTFE Tubing(Color Ra
Features:
The Duet3D Filament Monitor uses a IR optical motion detector to detect filament movement. The detected movement is transmitted to the Duet 2 Wifi, Ethernet or Maestro which uses the indicated movement to determine if the filament has run out, jammed or been ground away in the extruder. It is available for 1.75mm diameter filament only.
The monitor PCB comes with two Molex KK-style 3 way plugs and pins, along with ~60mm of Capricorn XS Ultra Low Friction PTFE tubing to act as the filament guide.
The Filament Monitor uses two printed parts to constrain the filament so that it passes over the centre of the the optical sensor at the correct height. Inlet and outlet PTFE tubes are clamped between these two parts. They must be printed in black filament.
Note: The Filament Monitor is sensitive to the filament type used, it has proved less sensitive to PETG of certain types.
Warning: The Filament Monitor is a Class 1 light device: Under normal conditions, the light beam is always below the IEC/EN 60825-1:2014 maximum permitted output level of 716uW according to the manufacturer of the optical sensor; nevertheless we advise against looking into the beam when the filament monitor is powered. You should most definitely not look at the sensor through magnification when it is operating. The beam is invisible infra red, therefore your eye blink reflex will not protect you.
Specifications:
Material: Plastic + Metal
Package Size: 20.0 * 15.2 * 1.0cm / 7.9 * 6.0 * 0.4in
Package Weight: 38g / 1.3oz
Packing List:
1 * Filament Monitor
2 * M3x25 Screw
2 * M3 Net
2 * Printed Parts
1 * 1M 4mm OD x 1.9mm ID PTFE Tubing(Color Ra
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000