Bluetooth Wifi ESP-32 Development Board ule Lora32 Lora 868Mhz ESP32 Lora Oled 0.96 Inch Blue Display With Antenna
641.000
₫ 513.000
Sản phẩm Bluetooth Wifi ESP-32 Development Board ule Lora32 Lora 868Mhz ESP32 Lora Oled 0.96 Inch Blue Display With Antenna đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 641.000 xuống còn ₫ 513.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Key features:
SX1276 chip based on ESP32 Wi-Fi, 868 – 915 MHz frequency, high sensitivity over -148 dBm, + 20 dBm output power, high reliability, long-transmission distance
Onboard 32 MB flash Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit, CP2102 interface and USB serial chip, perfect support for Arduino development environment, can be used for program checking, product development is very easy and fast
Specifications:
Operating voltage: 3.3 – 7 V
Operating temperature range: -40 to 90°C (-40 to 194°F)
Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct es
Data rates: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to -98 dBm
UDP sustained throughput: 135 Mbps
Colour: Black
Material: metal + PC
Package Contents: 1*Bluetooth WIFI ESP-32 development board ule
Reminders:
1) The 868/915 MHz antenna needs to be connected with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)
2) When the battery is full, the blue LED will stop working.
3) When using, pay attention to the positive and negative of the battery, otherwise it will be damaged.
4) With the IO port touchscreen touch signal input, you need to add the 100nF pull-down to this pin.Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
SX1276 chip based on ESP32 Wi-Fi, 868 – 915 MHz frequency, high sensitivity over -148 dBm, + 20 dBm output power, high reliability, long-transmission distance
Onboard 32 MB flash Wi-Fi antenna, 0.96-inch blue OLED display, lithium battery charging circuit, CP2102 interface and USB serial chip, perfect support for Arduino development environment, can be used for program checking, product development is very easy and fast
Specifications:
Operating voltage: 3.3 – 7 V
Operating temperature range: -40 to 90°C (-40 to 194°F)
Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct es
Data rates: 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b
Transmit power: 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n
Receiver sensitivity up to -98 dBm
UDP sustained throughput: 135 Mbps
Colour: Black
Material: metal + PC
Package Contents: 1*Bluetooth WIFI ESP-32 development board ule
Reminders:
1) The 868/915 MHz antenna needs to be connected with the IPEX interface (if the antenna is not connected, it may damage the LoRa chip)
2) When the battery is full, the blue LED will stop working.
3) When using, pay attention to the positive and negative of the battery, otherwise it will be damaged.
4) With the IO port touchscreen touch signal input, you need to add the 100nF pull-down to this pin.Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000