Battery Charger Li-ion 3.7V Li-fe 3.2V Ni-MH Ni-CD 6F22 9V AA AAA 16340 14500 Tophope❤

Description:
Charger requirements and features:
1. Available in 2 charging currents (500mA / 1000mA), 9V (6F22) 50mA
2. LED display charging status 25% 50% 75% 100% and battery type NiMH 1.2V Li-Fe 3.2V Li-ion 3.7V Li-ion 3.85V
3.9V (6F22) charging LED light is on, full of lights off
4. It can automatically identify Li-ion batteries and Ni-MH batteries, manually select Liepo4 and Li-ion 3.85V batteries, 9V (6F22) lithium batteries and NiMH batteries.
5. There is 0V voltage activation function, 1.65-1.85V can not be charged (but there will be active current turbulence type charging).
6. There are overcharge and discharge, short circuit, intelligent identification of bad battery and reverse battery detection protection.
7. Charging mode, constant current and constant voltage
8. With DC input, the charger working power is 5V-1.5A (Apple interface), 5V-2A (Micro socket)
9. With standard 5V/1000mA USB automatic identification output function
Description of buttons, LEDs and functions
1. Button:
In the case of power-on, press and hold the selection button for 2 seconds to convert 500mA 1000mA charging current to each other;
When charging the battery with power, press the SELECT button to change the type of the rechargeable battery. When the battery type is required to be charged (Example 3.20V 3.85V), it will enter the charging state for 5 seconds.
2. LED light display status:
The charger is connected to the 5V power supply, and all the LEDs of the charger are fully illuminated instantly. If the battery is not placed in the charging slot, the 500mA (LED) indicator is always on, and the other lights are off;
When there is a battery, 4 LED lights are all on, 3.7V LED will flash. At this time, press the button to select the type of battery to be charged. If not selected, enter the default battery after 5 seconds to charge. The indicator flashes at the corresponding battery level.
Press the button to check the charging type (no power indication) and return to the charging state after 5 seconds. When not powered, load the battery to check the power ratio (off after 5 seconds, you need to check and press again)
3.USB output indication:
When the USB output is detected, the battery indicator lights up for 10 seconds and then turns off. Press the button to view the battery level.
parameter:
Output voltage: 1.42V
4.2V±0.05V
3.65±0.05V
4.35±0.05V
10V±0.05V
Output current: 500mA/1000mA
Constant voltage charging, cut-off current: <100m A;
External power supply standby current: <15.0m A;
USB output function:
USB port output no-load voltage: 4.90-5.30V;
Output current: 1000 m A;
No-load current: <1m A;
When the load is 1000m A, the port output voltage is 4.75-5.25V;
Stop output protection voltage: 3.0±0.1V;
Compatible battery:
Li-ion / IMR: 18700, 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440, 9V (6F22)
Ni-MH / Ni-CD: C, SC, A, AA, AAA, 9V (6F22)
Charger size: 116mmx 60mmx30.5mm

Package Included:
1 x battery ch