Bảng Mạch Tăng Áp Từ 0.9v-5v Sang 5v Dc-Dc Chuyên Dụng
18.000
₫ 14.000
Sản phẩm Bảng Mạch Tăng Áp Từ 0.9v-5v Sang 5v Dc-Dc Chuyên Dụng đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 18.000 xuống còn ₫ 14.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
♥♥♥Welcome to innerset, I will hope you have a happy shopping!♥♥♥
Specification:
5V Output Version:
Input voltage 0.9-5V; Output voltage 5V
Maximum output current: 480 mA
Start-up voltage 0.8V, output current 7mA
Input 1-1.5V, output 5V 40-100mA
Input 1.5-2V, output 5V 100-150mA
Input 2-3V, output 5V 150-380mA
Input over 3V, output 5V 380-480mA
DC-DC boost conversion module, working frequency 150KHZ, typical conversion efficiency 85%.
Pin 2.54mm Spacing
Size: 11mm*10.5mm*7.5mm/0.43*0.41*0.29''
Weight: 3g
This is a voltage boost conversion module. When using it, the following conditions must be followed:
1. Input voltage should not be greater than nominal voltage, otherwise the module will burn out.
2. The input power must be greater than the output power, otherwise the output voltage will be less than the nominal voltage.
3. Output load should not be greater than nominal load, otherwise the output voltage will be less than nominal voltage.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Included:
1 X DC-DC Step-Up Power M
Specification:
5V Output Version:
Input voltage 0.9-5V; Output voltage 5V
Maximum output current: 480 mA
Start-up voltage 0.8V, output current 7mA
Input 1-1.5V, output 5V 40-100mA
Input 1.5-2V, output 5V 100-150mA
Input 2-3V, output 5V 150-380mA
Input over 3V, output 5V 380-480mA
DC-DC boost conversion module, working frequency 150KHZ, typical conversion efficiency 85%.
Pin 2.54mm Spacing
Size: 11mm*10.5mm*7.5mm/0.43*0.41*0.29''
Weight: 3g
This is a voltage boost conversion module. When using it, the following conditions must be followed:
1. Input voltage should not be greater than nominal voltage, otherwise the module will burn out.
2. The input power must be greater than the output power, otherwise the output voltage will be less than the nominal voltage.
3. Output load should not be greater than nominal load, otherwise the output voltage will be less than nominal voltage.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Included:
1 X DC-DC Step-Up Power M