Bảng Mạch Sạc Pin Lithium 5v Sang 4.2v 4.35v 3a Lithium Aailavi-0503V1
39.000
₫ 35.079
Sản phẩm Bảng Mạch Sạc Pin Lithium 5v Sang 4.2v 4.35v 3a Lithium Aailavi-0503V1 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 39.000 xuống còn ₫ 35.079, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Product Description:
Name: 3A polymer ternary lithium battery fast charging board (note that it is not suitable for 3.2V lithium iron phosphate battery)
Main control chip: IP2312
Input voltage: 4.5~5.5V
Charge cut-off voltage: 4.2V/4.35V (output voltage is available in 2 versions)
Charging current: 3A (can change current by adjusting resistance)
Indicator light: Yes, red: Work indicator. Blue: Full of indicators. Note: This product does not have a power indicator function, without battery protection function, the store also has a lithium battery protection board and power indicator board for sale.
Conversion efficiency: 3A 93%, 2A 94%, 1A 95% (data is for reference only)
The IP2312 uses a full CC/CV charging mode.
When the battery voltage is lower than 3V, it enters the trickle charge mode and charges the battery with a charge current of 100mA.
When the battery voltage is greater than 3V, enter the constant current charging mode to charge the battery with the set constant current charging current.
When the battery voltage is close to 4.2V and the charging current is less than 300mA, it enters the constant voltage charging mode. After entering the constant voltage mode, the charging is stopped after every 4 minutes, and the battery voltage is detected to be higher than 4.15V: if it is higher than 4.15V, the charging is stopped; otherwise, the charging is continued, and then the detection is performed after 4 minutes.
When the battery is fully charged, if it detects that the battery voltage is lower than 4.1V, it will turn on to charge the battery.
Current adjustment instructions:
Default 3A, remove resistor 2A, replace with 135k resistor 1A
Package Included:
1x 3A High Current Polymer Ternary Lithium Battery Charging Board 5V to 4.2V/4.35V Support Type C
Name: 3A polymer ternary lithium battery fast charging board (note that it is not suitable for 3.2V lithium iron phosphate battery)
Main control chip: IP2312
Input voltage: 4.5~5.5V
Charge cut-off voltage: 4.2V/4.35V (output voltage is available in 2 versions)
Charging current: 3A (can change current by adjusting resistance)
Indicator light: Yes, red: Work indicator. Blue: Full of indicators. Note: This product does not have a power indicator function, without battery protection function, the store also has a lithium battery protection board and power indicator board for sale.
Conversion efficiency: 3A 93%, 2A 94%, 1A 95% (data is for reference only)
The IP2312 uses a full CC/CV charging mode.
When the battery voltage is lower than 3V, it enters the trickle charge mode and charges the battery with a charge current of 100mA.
When the battery voltage is greater than 3V, enter the constant current charging mode to charge the battery with the set constant current charging current.
When the battery voltage is close to 4.2V and the charging current is less than 300mA, it enters the constant voltage charging mode. After entering the constant voltage mode, the charging is stopped after every 4 minutes, and the battery voltage is detected to be higher than 4.15V: if it is higher than 4.15V, the charging is stopped; otherwise, the charging is continued, and then the detection is performed after 4 minutes.
When the battery is fully charged, if it detects that the battery voltage is lower than 4.1V, it will turn on to charge the battery.
Current adjustment instructions:
Default 3A, remove resistor 2A, replace with 135k resistor 1A
Package Included:
1x 3A High Current Polymer Ternary Lithium Battery Charging Board 5V to 4.2V/4.35V Support Type C