Bảng Mạch Phát Triển Không Dây Ch340 Ch340G Nodemcu V3 Lua Wifi Esp8266
97.900
₫ 52.000
Sản phẩm Bảng Mạch Phát Triển Không Dây Ch340 Ch340G Nodemcu V3 Lua Wifi Esp8266 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 97.900 xuống còn ₫ 52.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Wireless module CH340 CH340G NodeMcu V3 Lua WIFI Internet of Things development board based ESP8266
DESKRIPSI:
Memperkenalkan NodeMcu V3 Lua Wifi Development Board berbasis eLua firmware System on Chip ESP8266. dilengkapi GPIO, PWM, IIC, 1-Wire dan ADC.
NodeMcu merupakan firmware dan development kit opensource yang membantu untuk membangun purwarupa dari perangkat IOT menggunakan Lua Script.
Board ini merupakan pemutakhiran dari versi sebelumnya yang menggunakan chip USB-TTL CP2102 digantikan dengan CH340.
FITUR
1. Bisa diprogram menggunakan Arduino IDE githubcom/esp8266/Arduino
2. Dukungan sumber terbuka (open Source). wwwnodemcucom dapat dipergunakan untuk mendevelop aplikasi IoT menggunakan Lua script
3. Built in IC CH340 USB-TTL (menggantikan versi lawas CP2102 )
4, Bisa diprogram langsung lewat USB.
5. Dibangun menggunakan SDK ESP8266
6. Menggunakan inti Lua berdasarkan eLua project
7. cjson berdasarkan lua-cjson (Build-in json, file, timer, pwm, i2c, spi, 1-wire, net, mqtt, coap, gpio, wifi, adc, uart dan system api )
8. File system berdasarkan spiffs
9. Mudah terhubung dengan router wireless.
10. Based on Lua 5.1.4 (without debug, os module.)
11. Event-Drive programming preferred.
SPESIFIKASI
- Wireless standard : IEEE 802.11b/g/n
- 6 x Digital I/O, 3 x PWM Channels, 1 x ADC Channel
- Full I/O control through WiFi network
- GPIO with 15mA current drive capability
- Supports Smart Link intelligent networking
- Built in 32-bit MCU
- built-in TCP/IP protocol stack, and support multiple TCP Client connection
- UART/GPIO data communication interface
#Wireless module #CH340 #CH340G #NodeMcu #V3 #Lua #WIFI Internet of Things development board #ES
DESKRIPSI:
Memperkenalkan NodeMcu V3 Lua Wifi Development Board berbasis eLua firmware System on Chip ESP8266. dilengkapi GPIO, PWM, IIC, 1-Wire dan ADC.
NodeMcu merupakan firmware dan development kit opensource yang membantu untuk membangun purwarupa dari perangkat IOT menggunakan Lua Script.
Board ini merupakan pemutakhiran dari versi sebelumnya yang menggunakan chip USB-TTL CP2102 digantikan dengan CH340.
FITUR
1. Bisa diprogram menggunakan Arduino IDE githubcom/esp8266/Arduino
2. Dukungan sumber terbuka (open Source). wwwnodemcucom dapat dipergunakan untuk mendevelop aplikasi IoT menggunakan Lua script
3. Built in IC CH340 USB-TTL (menggantikan versi lawas CP2102 )
4, Bisa diprogram langsung lewat USB.
5. Dibangun menggunakan SDK ESP8266
6. Menggunakan inti Lua berdasarkan eLua project
7. cjson berdasarkan lua-cjson (Build-in json, file, timer, pwm, i2c, spi, 1-wire, net, mqtt, coap, gpio, wifi, adc, uart dan system api )
8. File system berdasarkan spiffs
9. Mudah terhubung dengan router wireless.
10. Based on Lua 5.1.4 (without debug, os module.)
11. Event-Drive programming preferred.
SPESIFIKASI
- Wireless standard : IEEE 802.11b/g/n
- 6 x Digital I/O, 3 x PWM Channels, 1 x ADC Channel
- Full I/O control through WiFi network
- GPIO with 15mA current drive capability
- Supports Smart Link intelligent networking
- Built in 32-bit MCU
- built-in TCP/IP protocol stack, and support multiple TCP Client connection
- UART/GPIO data communication interface
#Wireless module #CH340 #CH340G #NodeMcu #V3 #Lua #WIFI Internet of Things development board #ES