Bảng Mạch Pcb 18650 / 26650
₫ 639.000
Sản phẩm Bảng Mạch Pcb 18650 / 26650 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Lithium battery, advantages: portable, stable and reliable, and durable.
Users need to supply 12V battery power, welding current is about 90A - 130A, for the common 18650/26650/32650 0.1mm - 0.15mm nickel plated welding.
Through the MOS tube output, this energy will be concentrated at the end of the welding pen, and it will be heated by short circuit.
After several generations of product updates, it is now upgraded to automatically trigger the welding, liberating the buttons of the fingers.
Power supply requirements
System voltage: 12V-14.6V (capacity X rate = must be greater than 150A)
Current requirements: 150A or more instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good performance above 20A)
Misunderstanding: Don't think that you can use 3 series 18650 series to supply power. After all, the conventional 18650 only has 3-5C discharge rate, so each section can only provide 2.5A x 3=7.5A load capacity, which is far from 150A unless 20 Parallel connection, 3 series and 60 sections of 18650 are possible, but it is obviously unrealistic.
Battery recommendation(without battery):
20-45ah Lead-acid battery with good performance and small internal resistance
3.5-5.5ah 45C 3S aeroel lithium battery pack
30-35ah capacity 18650 battery pack
colour:Black
Material:PCB
Package Contents:
2 x Heat shrink tube
2 x Copper soldering pen with wire
2 x Copper wire ear X battery connection line
3 x M5 screw
1 x Spot welding motherboard
1 x Nickel sheet about 80cmOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Users need to supply 12V battery power, welding current is about 90A - 130A, for the common 18650/26650/32650 0.1mm - 0.15mm nickel plated welding.
Through the MOS tube output, this energy will be concentrated at the end of the welding pen, and it will be heated by short circuit.
After several generations of product updates, it is now upgraded to automatically trigger the welding, liberating the buttons of the fingers.
Power supply requirements
System voltage: 12V-14.6V (capacity X rate = must be greater than 150A)
Current requirements: 150A or more instantaneous output (such as car starter power supply, 3S RC high-power battery pack, 20A lead-acid battery with good performance above 20A)
Misunderstanding: Don't think that you can use 3 series 18650 series to supply power. After all, the conventional 18650 only has 3-5C discharge rate, so each section can only provide 2.5A x 3=7.5A load capacity, which is far from 150A unless 20 Parallel connection, 3 series and 60 sections of 18650 are possible, but it is obviously unrealistic.
Battery recommendation(without battery):
20-45ah Lead-acid battery with good performance and small internal resistance
3.5-5.5ah 45C 3S aeroel lithium battery pack
30-35ah capacity 18650 battery pack
colour:Black
Material:PCB
Package Contents:
2 x Heat shrink tube
2 x Copper soldering pen with wire
2 x Copper wire ear X battery connection line
3 x M5 screw
1 x Spot welding motherboard
1 x Nickel sheet about 80cmOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000