Bảng Mạch Mở Rộng Lalaindah456 Cnc Shield V3 A4988 Drv8825 Cho Máy In 3d
₫ 273.800
Sản phẩm Bảng Mạch Mở Rộng Lalaindah456 Cnc Shield V3 A4988 Drv8825 Cho Máy In 3d đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Welcome to our store:)
It is a total of four slots, can drive four a4988 / drv8825 stepper motor driver.
Each road stepper motors only need two io ports. In other words, six io ports can be well managed three stepper motors
Very convenient to use
Uno for arduino module io port correspondence introduction.
Io corresponding figure above
Uno for arduino expansion board:
8: Stepper motor driver enable, active low)
7: Z.dir (z - axis direction control)
6: Y.dir (y - axis direction control)
5: X.dir (x - axis direction control)
4: Z.step (z - axis stepper control)
3: Y.step (y - axis stepper control)
2: X.step (x - axis stepper control)
Note:
When instincting the a4988 module, must be careful not to insert opposite.
Stepper motor wiring as followers:
2a, 2b is a group (Red, green.)1a, 1b is a group (Blue, yellow.)If want to change direction, can be change the position of one group, for example 2a, 2b mutually exchanged.
Package content:
- 1x cnc shield v3 expansion board please ask stock first:)
Thank you for shopping in our store.
Lalaind
It is a total of four slots, can drive four a4988 / drv8825 stepper motor driver.
Each road stepper motors only need two io ports. In other words, six io ports can be well managed three stepper motors
Very convenient to use
Uno for arduino module io port correspondence introduction.
Io corresponding figure above
Uno for arduino expansion board:
8: Stepper motor driver enable, active low)
7: Z.dir (z - axis direction control)
6: Y.dir (y - axis direction control)
5: X.dir (x - axis direction control)
4: Z.step (z - axis stepper control)
3: Y.step (y - axis stepper control)
2: X.step (x - axis stepper control)
Note:
When instincting the a4988 module, must be careful not to insert opposite.
Stepper motor wiring as followers:
2a, 2b is a group (Red, green.)1a, 1b is a group (Blue, yellow.)If want to change direction, can be change the position of one group, for example 2a, 2b mutually exchanged.
Package content:
- 1x cnc shield v3 expansion board please ask stock first:)
Thank you for shopping in our store.
Lalaind
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000