Bảng Mạch Điều Khiển Sạc Pin Tự Động 12v
80.000
₫ 66.000
Sản phẩm Bảng Mạch Điều Khiển Sạc Pin Tự Động 12v đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 80.000 xuống còn ₫ 66.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
100% brand new and high quality!
The relay acts as an automatic closing and breaking circuit through the live wire.
RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process).
The battery detects the high level and the low level through the protection board to perform fully automatic management charging;
When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.
The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free.
Specifications:
Item type: 12V charger power control board
Model:XH-M601
Power Supply Voltage:13.8-14.8V
Relay Operating Voltage:12.4V
Relay Disconnect Voltage:14.8V
Voltage Tolerance:+/-0.1V
Voltage Detection Way:DC voltmeter
Charging Type:12V storage battery
Potentiometer Adjustment:RP1, RP2
Size:about 50*32*18mm
Potentiometer Adjustment:
1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)
2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)
Package includes:
1* Power Supply Controller Board
Notes:
Transition: 1cm=10mm=0.39inch
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
#Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #
100% brand new and high quality!
The relay acts as an automatic closing and breaking circuit through the live wire.
RP1 and RP2 adjustment will affect the working voltage of the relay to open and close, the charging board is powered by the battery, and the voltmeter plays the role of detection (pay attention to the connection of the positive and negative poles and the live line during the wiring process).
The battery detects the high level and the low level through the protection board to perform fully automatic management charging;
When the battery voltage drops to about 12.4V (low voltage adjustable), the protection board will automatically perform the secondary charging, the closing voltage is about 14.8V (the cutoff voltage is adjustable), the red light is on when charging, and the red light is off when the relay is off.
The 220V input terminal is disconnected and charged, which provides charging protection and energy saving effect, and is safe and worry-free.
Specifications:
Item type: 12V charger power control board
Model:XH-M601
Power Supply Voltage:13.8-14.8V
Relay Operating Voltage:12.4V
Relay Disconnect Voltage:14.8V
Voltage Tolerance:+/-0.1V
Voltage Detection Way:DC voltmeter
Charging Type:12V storage battery
Potentiometer Adjustment:RP1, RP2
Size:about 50*32*18mm
Potentiometer Adjustment:
1.RP1:adjust storage battery start charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)
2.RP2:adjust storage battery disconnect charging voltage (low voltage setting:clockwise becomes higher,counter-clockwise becomes lower)
Package includes:
1* Power Supply Controller Board
Notes:
Transition: 1cm=10mm=0.39inch
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
#Control #Board #Battery #Charging #Intelligent #Charger #Module #Accessories #Parts #Professional #Power #Supply #Automatic #