Bảng điều khiển cảm biến mực nước tự động
₫ 85.100
Sản phẩm Bảng điều khiển cảm biến mực nước tự động đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Water Level Switch Sensor Automatic Control Panel
The product is based on the detection of water level in the pool (water tower) to control the high current relay to achieve control. The utility model has the advantages of small size, convenient connection, small power consumption, large switch capacity, strong anti-interference, high function stability, etc.. The water tank (water tower) can be automatically opened when the water is short of water, and the pump can be stopped automatically when the water is full.
Widely used: Families, factories and mines, drinking water tanks, boilers, vehicles, reservoirs, power stations, industrial equipment and so on
Product type: switch type liquid level control board
Power supply voltage: 12V
Control load voltage: 0-380V
Control load current: 0-10A
Product size: 70*40*25mm
Net weight: about 27g
About the probe: the probe is below 12V weak current. Go up, down, three lines. The probe can buy special probe, can also use ordinary wire thread to peel 3-5 cm, the bare wire can be directly induced. Our products don't contain probes!
Note: contact with water proposal It's better to use aluminium wire or contact stainless steel!
Working principle: upper s, Z probe under XMore than two of themWhen the water is out of the water, the relay is closed and the relay is disconnected when the X probe is soaked in the Z under the s.
(12V supply voltage, load can be non 12V or DC AC load, wiring see below description pic
The product is based on the detection of water level in the pool (water tower) to control the high current relay to achieve control. The utility model has the advantages of small size, convenient connection, small power consumption, large switch capacity, strong anti-interference, high function stability, etc.. The water tank (water tower) can be automatically opened when the water is short of water, and the pump can be stopped automatically when the water is full.
Widely used: Families, factories and mines, drinking water tanks, boilers, vehicles, reservoirs, power stations, industrial equipment and so on
Product type: switch type liquid level control board
Power supply voltage: 12V
Control load voltage: 0-380V
Control load current: 0-10A
Product size: 70*40*25mm
Net weight: about 27g
About the probe: the probe is below 12V weak current. Go up, down, three lines. The probe can buy special probe, can also use ordinary wire thread to peel 3-5 cm, the bare wire can be directly induced. Our products don't contain probes!
Note: contact with water proposal It's better to use aluminium wire or contact stainless steel!
Working principle: upper s, Z probe under XMore than two of themWhen the water is out of the water, the relay is closed and the relay is disconnected when the X probe is soaked in the Z under the s.
(12V supply voltage, load can be non 12V or DC AC load, wiring see below description pic
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000